"ShockBlock" Bolt Buffer for Ruger® 10/22® Internals

Shock Block Bolt Buffer for Ruger® 10/22®

TANDEMKROSS

$4.99
(115 reviews) Write a Review
SKU:
0118N0039BLK1
Weight:
0.30 Ounces
Adding to cart… The item has been added

At a Glance: 

  • Eliminates "Bolt-Battering" of the receiver 
  • Eliminates vibration from metal to metal contact 
  • Easy drop in ready, no tools required 
  • Oil and solvent resistant 
This accessory is a must have for any Ruger® 10/22® owner. The TANDEMKROSS Shock Block Bolt Buffer is a great upgrade and is an inexpensive addition to your 10/22® rifle. Eliminates the metal-to-metal contact between the bolt and the receiver pin and eliminates vibration cause by the metal-to-metal contact. 
 
The Shock Block Bolt Buffer for Ruger® 10/22® reduces impact stress on the receiver, made for high tolerances, high impact resistance, superior load bearing properties.
 
The Shock Block Buffer comes with the TANDEMKROSS lifetime guarantee. 
 

115 Reviews

  • 5
    From CLUNK, to thump.

    Posted by Rock It Mann on 7th Jun 2017

    While I only have this as a spare to the one I already have in my 10/22, this one was half the price of the other. If you don't have one of these in your 10/22, well when you finally do, you will realize the CLUNK of the bolt hitting the metal Bolt Stop, is louder than the crack of the .22 when fired. This takes that cheap sounding CLUNK, and turns it into a more quality sounding soft thump. I also found on installation, a little lube helps. :-D

  • 5
    gun nut

    Posted by tim on 20th May 2017

    installed easily, seemed to make the 10-22 more reliable,have had zero ftf. fte.jam,s ect. since install.

  • 4
    Shock Buffer

    Posted by DB Hall on 29th Apr 2017

    As one other reviewer stated, it's a hard fit to get it in the holes, however, once it's in it works great. 10/22 is much quieter when the bolt is cycling and I'm guessing the bolt and frame will last longer. Doesn't go in as easy as others I've used but seems to work very well and I don't have to worry about it falling out.

  • 4
    Works well but can be a problem installing

    Posted by John on 30th Mar 2017

    I ordered two of these. The one on my first rifle it was easy to install. The one for the second rifle, not so much After about 5 minutes I managed to get it through both holes. 10/22s don't have much of a recoil so I couldn't tell if it's reduced but it's quieter and the bolts should last longer instead of slamming against the stock steel buffer pin.

  • 5
    Competitive shooter

    Posted by Emily Cutts on 19th Mar 2017

    It is easy to install and decreases metal to metal contact.

  • 5
    Recoil Reducer

    Posted by theburg on 27th Feb 2017

    Does a great job of reducing bolt shock. Easy to install. Makes you Firearm run quieter.

  • 1
    manager

    Posted by Charlie on 5th Feb 2017

    Great idea. Flawed execution. The plastic compound will not make it through the second opening in the receiver. No matter how well guided, buffer pin cannot be pushed or hammered through the opposite hole in the receiver. Instead the material disforms. Does not matter whether the receiver holes or the buffer are cleaned or lightly lubed.

  • 4
    Mr.

    Posted by DANIEL on 3rd Feb 2017

    Works well in quieting down the bolt. I wasn't very impressed by the fit/finish, the cuts were rough, did not fit very well, but for $5... meh.

  • 5
    Buffer

    Posted by M.J. Williams on 23rd Nov 2016

    Significant reduction in bolt noise, installed in three differ rifles and only had a hard time with one install. Overall great product.

!