KrossFire Bolt for Ruger® 10/22®


(54 reviews) Write a Review
0.65 LBS

Out of stock

At a Glance:

  • Protective PVD coating and made of hardened steel for long life

  • TANDEMKROSS firing pin pre-installed and retained for consistent strikes

  • Precisely machined and radiused for smooth movement and hammer engagement

Both the Ruger® 10/22® and Ruger® 22 Charger™ are rimfire favorites for speed shooting competitions and recreational shooting. TANDEMKROSS’s precisely CNC-machined KrossFire Bolt for Ruger® 10/22® is the best way to optimize your rifle’s performance without taking your bolt to be reworked by an expert gunsmith!

Made in the USA with heat-treated billet steel, the KrossFire Bolt features a lateral retaining pin to prevent the firing pin from moving vertically. This ensures your firing pin only moves forwards and back as intended to provide more consistently positive primer strikes.

Additionally, the KrossFire Bolt also comes with TANDEMKROSS’s Fire Starter Titanium Firing Pin pre-installed! Being made of titanium makes the Fire Starter highly durable to last you a long time. This titanium firing pin is also lighter than steel to help reduce lock time and allow for faster consecutive shots on target.

A long-lasting bolt deserves long-lasting parts, so the KrossFire also comes with the TANDEMKROSS hardened tool steel Eagle’s Talon Extractor pre-installed. Highly resistant to wear and aggressively hooked to confidently secure cartridges, the Eagle’s Talon helps to reduce failures to extract.

The KrossFire’s new look offers more than just a good looking finish. The black PVD coating offers your precisely machined bolt with a protective coating to keep it running for as long as possible.

Lastly, the geometry of this upgraded bolt is incredibly important. The rear face is carefully radiused to provide a more forgiving point of contact with the hammer allowing for smoother cycling and charging. 10/22® fans also frequently get the headspace of their bolt reworked for optimal results, so we designed ours with those figures already in mind so no additional work needs to be done!

The TANDEMKROSS KrossFire Bolt for Ruger® 10/22® will support virtually all factory models of Ruger® 10/22® or 22 Charger™. So, get your upgraded bolt today and make your good gun great!

Supported Models:

  • Ruger® 10/22®

  • Ruger® 10/22® Carbine

  • Ruger® 10/22 Takedown®

  • Ruger® 10/22 Takedown LITE®

  • Ruger® 10/22® Compact

  • Ruger® 10/22® Tactical

  • Ruger® 10/22® Sporter

  • Ruger® 22 Charger™

The KrossFire Bolt is protected against mechanical failure for life by TANDEMKROSS’s Lifetime Guarantee. TANDEMKROSS firing pins, extractors, and springs are protected against mechanical failure for two years after the time of purchase. Learn more about our warranty and returns policies here.



WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to

54 Reviews

  • 5
    Krossfire bolt for 10/22

    Posted by Jeffrey Weatherby on 28th Aug 2023

    Before installing this bolt, my 10/22 was unreliable at best. It would mis feed and stove pipe often. After installing the KrossFire bolt I have had 0 issues. My 10/22 works like a charm now. No issues any more, this bolt upgrade just saved my 10/22! Thanks Tandemkross!!

  • 5
    Kross Fire Bolt for Ruger 10/22.

    Posted by Ed Towery on 14th Aug 2023

    I highly recommend this item for all 10/22's. The factory bolt always had a failure to eject with at least 1 or 2 magazines. I installed the new Kross Fire Bolt and fired over 200 rounds without a single fail to eject. I wish I had bought this item years ago. I shoot this Ruger 10/22 in semi-auto competition.

  • 5
    Krossfire bolt

    Posted by Lou on 3rd Aug 2023

    Like everything else I ve purchased from Tandomkross this bolt and the upgraded charging handle turned my wife s aggravating 10/22 into a great little rifle. Stove piping and extraction issues are almost totally eliminated where as before the upgrade it was just aggravating to shoot.

  • 5
    KrossFire Bolt for Ruger® 10/22

    Posted by Tony on 18th Feb 2023

    This part was a bit on the higher price end, but I couldn t resist not getting it. This one is made better than the original one and I m really excited about running it in my 10/22.

  • 5
    KrossFire Bolt 10/22

    Posted by Tommy on 30th Nov 2022

    A very nicely machined fit and function. The included upgraded firing pin and extractor were also flawless. Installed an extended charge handle with it and ran several hundred rounds. My 10/22 operated perfectly. Great professional upgrade that looks great too.

  • 5
    Tandemkross Bolt for 10/22 Ruger

    Posted by B. Reich on 3rd Nov 2022

    Terrific upgrade for your Ruger 10/22 and very easy installation. Much better than the factory bolt hands down. Not cheap but definitely worth the money.

  • 2

    Posted by John Elliott on 3rd Oct 2022

    Bought this bolt and took it out for range testing over the past couple of days. It works wonderfully with the 10 round rotary magazines. The BX25 mags - not so much. It would either fail to strip the round from the magazine or crush the cartridge before it got into the chamber. Would only function well if the BX25 was loaded with 15 rounds or less.

  • 5
    Great bolt!!

    Posted by Gaston on 17th Sep 2022

    The smoothest bolt one can get. Upgraded from the factory bolt I have run about 1000 rounds with no issues at all. Runs smoothly. Highly recommended upgrade for the Ruger 10-22.

  • 5
    KrossFire Bolt for Ruger 10/22

    Posted by Brian Ferguson on 8th Jul 2022

    This bolt is the perfect upgrade to any 10/22. I shot a match a week after receiving it and it was so great not having any ftf or failed to eject and its so smooth WTG TANDEMKROSS another great product please check out this bolt for your next upgrade and all the other great products that TANDEMKROSS has to offer