Lightweight Aircraft grade Aluminum Barrel Retaining V-Block for Ruger® 10/22®

Barrel Retaining V-Block for Ruger® 10/22®

TANDEMKROSS

$19.99
(15 reviews) Write a Review
SKU:
TK18N0449RED1
Weight:
0.03 Ounces
Adding to cart… The item has been added

Barrel Retaining V-Block for Ruger® 10/22®

 
At a glance:
  • 55% weight reduction to stock version
  • Precision cut to maximize barrel rigidity and reduce barrel droop
  • Improves accuracy and long distance shooting
The TANDEMKROSS Barrel Retaining V-Block replaces the stock part with a precision cut aircraft grade aluminum unit - 55% lighter than the stock stainless version! - A must have for a lightweight build!
 
The TANDEMKROSS V-Blocks secures the barrel to the receiver with increased stiffness and rigidity, eliminating the barrel droop (or barrel sag) that is commonly seen over time with a stock v-block. The factory V-Block can to pull the barrel down - the [TK] V-Blocks is designed to provide a camming action that applies an upward force vector -the more torque you apply to the V-Block, the more upwards force applied to the barrel. The upgrades v-block assists with free-floating the barrel from the stock. This enhancement alows for better accuracy with more consistent shot placement. 
 
This part will fit virtually any aftermarket receiver and barrel made to stock spec - without any gun-smithing needed.
 
This part is designed to utilize the stock hardware* or can be paired with the V-Block Screws for Ruger® 10/22® by Rim/Edge
 
Don't forget, all TANDEMKROSS products are Made in the USA and come with a LIFETIME guarantee!
 
⚠️ WARNING: This product may expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov

15 Reviews

  • 5
    This V-Block is the one !

    Posted by Dave T. on 20th Nov 2024

    Installed easy and really supports the barrel. I would buy again.

  • 5
    TK V-block for build

    Posted by Daniel on 30th Sep 2024

    I ordered this lightweight vblock and an aftermarket lightweight barrel. On my scale the stock 10/22 barrel (no sights) and vblock weighed 1lb 13.5 oz The new vblock and lightweight barrel weighed 15.5 oz. The Magpul MOE-x22 stock is light but swapping the insert from pencil barrel to bull barrel reduced even more weight. I paired it with a butler creek featherlight sling with Outdoor Connection Brute Sling Swivel's that are also super light .the rifle practically weighs nothing. I could probably remove the stock pic rail but it’s so light I probably won’t.

  • 5
    Installation

    Posted by Devante Zanders on 4th Aug 2024

    It was easy to install and as always a quality product from tandem cross

  • 5
    Barrel retaining v-block for Ruger 10/22.

    Posted by Ed Towery on 14th Aug 2023

    V-Block is made sturdy and holds barrel in place better than other v-blocks that I have purchased. I recommend it for any 10/22. Be sure and note the installation.

  • 5
    Ruger V Block

    Posted by Gary on 9th Aug 2023

    Went together real easy and so far seems to be holding well has kept zero for the first 1000 rds

  • 5
    Great Quality and Fit

    Posted by Patrick on 6th Jul 2022

    This is a well made perfect fit V Block that is made in the USA. Super easy to install and when you do you will see the additional support the Tandemkross V block adds. I'll get another one if I get a second 10/22

  • 5
    Fixed the Barrel Droop

    Posted by Mike on 17th May 2022

    Prior to installing this V-Block the rifle shot 2 feet low at 50 yards. It solved the problem with barrel droop. Minimal adjustment of the scope was required to get the rifle zeroed. With the problem of barrel alignment resolved, it probably contributed to function reliability.

  • 5
    V-Block

    Posted by Robert Franco III on 10th May 2022

    It s hard to review something you can t feel in operation. But I will say it s a obvious upgrade to the stock block and install was a breeze. Any gun owner can see exceptional quality when they see it.

  • 5
    Beautiful V-block

    Posted by TJH on 4th Mar 2022

    Excellent V block, perfect fit. Beautiful laser etching and available in anodized red. Perfect for replacing your stock part or doing a custom build. Easy install, would recommend this item. Make sure you upgrade the bolts too.

!