At a Glance:
-
Dual action; releases magazine with push or pull
-
Enlarged and textured for easy, no-slip use
-
Easy to install with no permanent modifications
Simplify and speed up magazine changes for your Ruger® 10/22® with the Fireswitch Extended Magazine Release from TANDEMKROSS! Now available in BLACK or RED!
A slow magazine change can negatively impact your performance in a shooting competition. Making the magazine release easier to find and use is a crucial way to improve the ergonomics and controls on your rimfire rifle.
Enlarging the magazine release and enabling it to be pushed or pulled makes it easier and safer to actuate in all conditions, with or without gloves, by hands of all sizes. The surface is also textured to help provide a slip-resistant surface.
Stop fumbling and struggling! Confidently gain total control of your firearm with the Fireswitch Extended Magazine Release for Ruger® 10/22® today!
Supported Models:
-
Ruger® 10/22®
-
Ruger® 10/22 Takedown®
-
Ruger® 22 Charger™
This product is protected against mechanical failure for life by TANDEMKROSS’s Lifetime Guarantee. Learn more about our warranty and returns policies here.
WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
134 Reviews
-
Easy Installation
It only took a few minutes to install the Magazine Release. It works smoothly and helps get the magazine out of the weapon fast without having to look for the release.
-
Mr.
Well i'ma not sure what to say other than I LOVE IT. My friend at the range said "Now that's the best part" I've seen you add to your Ruger 10/22. Everyone loves it and they don't have a Ruger 10/22.
-
Bought it
Cool concept but does not work properly on my Ruger 10/22. Mags drop out or come loose just fine when pushing forward on the FireSwitch. Pulling it back, well, there is the rub. It only disengages about 2/3rds of the way needed to drop the mag. Have to pull hard and force the lever up to disengage fully and drop the mag. I have a Pike Arms Trigger group housing. It's CNC machined and very nice. Do not know if that is the big difference in the FireSwitch operation. A major bad point about this item is when the mag is fully seated the FireSwitch lever becomes loose and floppy. Just rattles about in normal mag in position. For me the FireSwitch is not confidence inspiring. Does not work as sold. To rattly loose and has just become a waste of money. Will be removing it and going back to a regular extended style mag release. Sorry but I did try it out. Just didn't work for me. Caveat Emptor.
-
Sweet in every way
If your on the fence, go for it. It's the best on the market and install was way easy!
-
Competitive shooter
After putting this on my rifle it made getting the mag's out so much easier. Now I can push it back instead of trying to get my finger under it and pull it forward.
-
Great Upgrade
Added "Fireswitches" on two Brimstone converted Ruger BX Triggers. They work great and are so much easier to work than the extended release that comes stock on the BX Trigger. Release lever works perfectly in either direction. After experimenting a bit, I've decided I'm a push person and not a pull person. One thing to be aware of is that the release lever blocks access to the bolt release from right side. You will need to retrain yourself to use your left hand to lock the bolt back if you've been doing it one-handed in the past. Something to think about if you are right-handed.
-
Ms
This has to be the slickest item Tandemkross has produced yet! Do yourself a favor and add this item immediately to your cart! You will not be disappointed!
-
Mr.
Installed with no problems. After about 10-12 mag changes the pin holding the two parts together fell out. The pin and lower lever dropped into the grass. Found the lower lever but not the pin. Purchase now useless. Also the lower lever extended excessively below the trigger guard.
