TANDEMKROSS 10/22® DoubleKross Installation Instructions
At a Glance:
- Lightweight and compact to double your rounds with one mag body
- One complete housing with two compartments
- Clear for easy visual confirmation of round count
The TANDEMKROSS DoubleKross Magazine Body for Ruger® 10/22® is a complete magazine body that houses two factory BX-1 or 10-round clear rotary mags in a single compact and lightweight design. This mag body is perfect for competition shooters, backyard plinkers, and backpackers looking to streamline their gear while having the reliability of the factory rotary magazines.
When you deplete the first 10 rounds, quickly eject and flip it over for another full magazine! The clear DoubleKross gives you the ability to quickly count your rounds and change your magazines! Unlike other aftermarket magazine couplers, the DoubleKross fits perfectly in any standard 10/22® magazine pouch; but you’re really carrying two mags instead of one!
To assemble or maintain your mags, make sure you get the Green Springs for Ruger® 10/22® Rotary Magazines or Magazine Assembly Tool with Pouch and Carabiner for Ruger® 10/22®.
Looking to save some time? Get a fully Assembled DoubleKross Magazine for Ruger® 10/22®!
Supported Models:
- Ruger® 10/22®
- Ruger® 10/22® Carbine
- Ruger® 10/22 Takedown®
- Ruger® 10/22 Takedown LITE®
- Ruger® 10/22® Compact
- Ruger® 10/22® Tactical
- Ruger® 10/22® Sporter
- Ruger® 22 Charger™
- Ruger® 10/22® Target
The DoubleKross Magazine Body is NOT compatible with left-handed magazines or magazine internals.
IMPORTANT: This product is the magazine BODY only. The DoubleKross Magazine Body does not include the internal magazine components. You will either need to repurpose the parts from existing factory magazines, or purchase the magazine internals separately.
This product is protected against mechanical failure for life by TANDEMKROSS’s Lifetime Guarantee. Learn more about our warranty and returns policies here.
⚠️ WARNING: This product can expose you to chemicals including BPA, which is known to the State of California to cause reproductive harm. For more information go to www.P65Warnings.ca.gov
150 Reviews
-
better than factory
These mags are much easier to handle than the factory mags and worth every penny. If you want to save yourself some headache buy the installation tool for the mags it will make the assembly job much easier
-
Mr.
READ THIS IF YOU HAVE DIFFICULTY - These mags are awesome, but I made a mistake when working with the coil spring which resulted in me not noticing that I had pulled the tip of the spring out of the anchor hole inside the red cylinder. This resulted in binding which was not easily spotted (with my old eyes.) Customer support was OUTSTANDING and together we resolved the issue. Couldn't be happier with this simple compact product. I used an 11mm box wrench but the tool is probably worth a consideration.
-
None
To be honest, it is still on the kitchen table where I unpacked it. Haven't yet assembled or tried it out. Busy time of the year in the boat biz!
-
Sir
Easy to put together and tried both sides without a failure. The clear viewing capability is a plus.
-
These are Great
These Double Kross magazines are great. Saves time reloading on the range, and are actually much easier to load than the ruger factory mags. I gave them the recommended "8 step turns on the spring" , seems much lighter than factory mags. I gave one 9 steps, did not tell any difference from ones with 8, but all work flawlessly so far, maybe 700-800 rounds loaded and fired. Highly recommended, especially in CA or any other state with 10 round max.
-
Handy Man
Great mag body for the 10/22! Reliable & a definite must have
-
Satisfied User
Great product. Low profile as compared to Ruger 15-Rounder. Ran box of ammo through it on initial test, after installing Ruger internals...not one FTF. Will likely pickup another. Would like to see this in a smoke cleared finish than clear, but this is a personal taste/preference.
-
Real Slick
Great product! I bought five and gutted and 10 old mags for parts. You'll be amazed at how dirty the old mags can get inside. I scrubbed all old parts down with a toothbrush and Ballistol, wiped clean and re-assembled into the clear mag bodies using the TK tool. Slicker than ol' Slick Willy! Shot a brick of 500 today without a single misfeed. And man, do I like a clear mag. No more guessing.
-
Yos
excellent product and exdellent service.
