-
-
-
-
-
-
-
-
-
-
Black Dog Machine, LLC
Ruger® Mark™ Series Holster by Black Dog Machine - High Ride
Out of stock$49.99 -
-
Customize Your Ruger® Mark IV™ 22/45™ with TANDEMKROSS
Trigger and Internal Upgrades
The factory Mark IV™ 22/45™ offers a lot out of the box, but many shooters—especially action-style competitors—immediately want to get the best trigger pull possible. What serious shooters notice first is movement: trigger take-up before the sear releases and overtravel afterward that has to be recovered before the trigger resets.
Across the line, TANDEMKROSS uses a flat, textured trigger face so the finger lands in the same place shot after shot, and passes SAAMI drop safe and jar off safety standards. For the 22/45™, the Ultimate Trigger Kit for Ruger® Mark IV™ and Mark IV™ 22/45™ treats the trigger group as a system rather than a single swapped part. Supporting internals including the Eagle's Talon Extractor, the Sentinel Guide Rod, Rebound Springs, and the Essential Maintenance Kit are available separately for shooters chasing reliability or looking for replacement parts for routine maintenance especially at high round counts.
Optic Mounting and Sights
Iron sights ask the shooter to align three things at once: rear notch, front post, and target. A red dot helps simplify aiming and positively identifying targets, especially for people with less than perfect vision or in situations that may impact visibility such as low-light or low contrast environments. Competitive leagues such as SASP, Rimfire Challenge, Steel Challenge, or Metal Madness typically separate rimfire pistols into divisions that mutually exclude the use of optics or iron sights. That said, the decision to use optics or irons often comes down to a mix of your chosen discipline and personal preference.
TANDEMKROSS provides a solution for either situation. The Shadow Mount V3.0 for Ruger® Mark™ Series fastens directly to the receiver using the standard rail mounting screw holes allowing the optic to sit low to the bore axis without the need for a picatinny rail or picrail adapter The Shadow Mount ships with all the hardware you need to attach both the mount and your optic. Shooters who prefer a rail interface can use the Shadow Picatinny Rail for Ruger® Mark™ Series instead. For Rimfire Pistol Iron Sights competitors and anyone who generally prefers irons, the Eagle Eye Sight Set for Ruger® Mark IV™ 22/45™ replaces the factory sights with a fiber optic set that presents a clearer and brighter sight picture in most conditions.
Grips, Thumb Ledges, and Charging Rings
The 22/45™ grip frame is polymer and shaped like a 1911. This is one of many reasons the platform is so popular. Similar to the 1911, the 22/45™ is highly customizable with things like grips, “slide rackers” and extended controls. This provides the everyday Mark IV™ 22/45™ countless ways to make their pistol uniquely fit their needs and preferences.
TANDEMKROSS improves the ergonomics of the 22/45™ from multiple angles. The hiveGrip replaces the factory grip panels with a textured surface and finger grooves made from a material that dampens recoil and holds firmly even under less than ideal circumstances like rain or extreme heat or cold. The Get a Grip Kit bundles grip components for owners looking to improve control in multiple places in one pass. The Accelerator Forward Thumb Ledge gives the support thumb a fixed index point so the grip is repeatable each time you draw from the holster. For racking the bolt or clearing the action, the halo Charging Ring for Ruger® Mark III™, Mark IV™, and 22/45™ mounts to the small factory serrated “ears” on the bolt with a an easy-to-use full ring that can be worked from either side with a single finger or the whole hand if needed.
Magazines, Bumpers, and Reload Speed
Rimfire magazines can be where many range day frustrations start. Ruger® Mark™ Series magazines feed a rimmed cartridge through a narrow single stack mag body and springs can become less effective after years of storage and use. Other parts or even entire mags can get worn, damaged, or lost over time and a good mag is the heart of a great pistol. Anything you can do to get an edge can make a big difference on the range, especially if you're racing against the clock.
TANDEMKROSS recognizes magazines are arguably more akin to being consumable hardware than a permanent part of the pistol. Green Springs Magazine Springs for Ruger® Mark™ Series restore spring pressure in magazines that have gone soft, sold in a three-pack so a full match rotation can be refreshed at once. The Tomahawk Hooked Bumper for Ruger® Mark IV™ 22/45™ adds a hooked base pad that gives the support hand something positive to pull on if a magazine hangs up while extending the usable area of the grip. Quick Grip .22 Magazine Pouches and the Loading Tool and Lanyard for Single Stack .22lr Magazines round out the reload side. MarkPRO Extended Magazine Bumpers come in a two-pack and extend the width of the base pad so it extends and flares outward beyond the magwell for firm and confident magazine seating. Brass Magazine Follower Buttons help promote and preserve smooth and proper feeding. Maximus +1 Followers additionally support smooth feeding while also adding one round of capacity to the magazine (availability may depend on local rules and regulations).
Compensators and Muzzle Devices
A .22 LR pistol does not recoil hard, but it does move. In competition, the cost of that movement is the time it takes to get from one shot on target to the next. Many disciplines such as Steel Challenge, Rimfire Challenge, Metal Madness, or SASP permit compensators in their respective rimfire pistol divisions while prohibiting suppressors, making compensators ideal solutions for fighting muzzle rise.
Any of TANDEMKROSS's compensators would serve as perfect solutions for anyone looking to mitigate recoil via a muzzle device. The Game Changer, Game Changer PRO, Game Changer PRO Squared, or Steam Demon are all available in .22lr and a number of colors or finishes to cater to your needs and match the rest of your pistol's aesthetic. The Game Changer is made of aluminum for those looking for some gas compensation while keeping added weight down. TK's other three compensators are steel for durability and to add weight for balance. All mount to a threaded muzzle, so confirm your 22/45™ barrel is threaded before ordering.
How to Choose the Right Ruger® Mark IV™ 22/45™ Upgrade
Where to Start on a Factory 22/45™
Start with the part you touch on every shot and work outward.
First, the charging ring. Quickly and easily rack the bolt or clear the action even with cold, sweaty, or gloved hands.
Second, the trigger. A properly tuned trigger pull leads to clean, consistent, reliable results you can trust all day, every day.
Third, magazine components. Your pistol is only as reliable as its magazine, so you should make sure it has every advantage it can get.
Lastly, grips, controls, and more. Improved grips and extended controls like safeties or magazine releases boost ergonomics to make a positive impact on both practical performance and comfort.
Building for [Competition/Action Style Shooting/Match Day/etc]
Many shooting sports such as SASP, Steel Challenge, Rimfire Challenge, or MMSSA run at least two rimfire pistol divisions. Viewing upgrades and accessories like tools helps ensure you pick the right tool for the job.
- Rimfire Pistol Open/Optics: Upgrades and accessories like optics, compensators or muzzle brakes, and trigger jobs are permitted, so a Shadow Mount V3.0 with a red dot is an ideal choice, paired with a trigger that keeps splits tight, a grip that holds position across five plates, and a comp that keeps your recoil flat.
- Rimfire Pistol Iron Sights: Optics are not permitted, so the Eagle Eye Fiber Optic Sight Set is an alternative for a clear sight picture with rapid target acquisition.
Before your first match: Confirm current equipment rules with the league's rulebook or your match director since division rules are updated periodically.
Compatibility Across Mark IV™ Variants
The Ruger® Mark IV™ family shares a large number of parts and features with a few nuances. Whether a part is supported across the line largely depends on each particular model.
- Cross-Compatible Parts: Many internal components, bolt and bolt assembly parts, and internal magazine replacement parts generally fit across the Mark IV™ family.
- Parts Specific to Frame Type: Grips, thumb ledges, magazine releases, trigger shoes, or magazine basepads interact directly with the frame and may differ depending on your particular model. The 22/45™ uses a 1911 style polymer grip frame while the standard Mark IV™ uses an angled metal frame, so these should be selected in accordance with the exact model you own.
- Parts Specific to the Receiver or Barrel: Sights, optic rails or mounts, and muzzle devices are largely cross compatible on most popular offerings, but may still differ for some specific models.
TANDEMKROSS guarantees compatibility with factory Ruger® models in factory furniture and TANDEMKROSS original firearms. Results with third-party chassis or receivers may vary.
Ruger® Mark IV™ 22/45™ FAQs
How does a TANDEMKROSS trigger compare to the factory Mark IV™ trigger?
TANDEMKROSS trigger designs differ from the factory trigger in face geometry, spring design, and adjustability. The trigger face is flat and textured so finger placement repeats shot to shot, where a curved face may allow the finger to migrate. For the 22/45™, the Ultimate Trigger Kit for Ruger® Mark IV™ and Mark IV™ 22/45™ upgrades the whole fire control group.
How do I identify a Mark IV™ vs a Mark IV 22/45™?
Check your barrel and frame markings for the model designation, and look at the grip frame. The standard Mark IV™ has a traditional, curved grip frame, while the 22/45™ and the 22/45™ LITE use a 1911-style polymer grip frame with a steeper grip angle. This distinction matters when shopping for accessories because frame-level parts like grips, thumb ledges, and magwells are specific to each frame type, while action-level components like trigger group parts, extractors, and magazine springs generally carry across the full Mark IV family.
Which accessories fit every Mark IV™ variant?
The following TANDEMKROSS accessories are compatible across the entire Mark IV™ family, including the Mark IV™ Standard, Tactical, Target, Hunter, Competition, 22/45™, and 22/45™ LITE:
- KrossFire Bolt
- Essential Maintenance Kit (firing pin, extractor, extractor spring and plunger, rebound springs)
- Sentinel Guide Rod
- halo Charging Ring
- Green Springs Magazine Springs
- Maximus +1 Magazine Followers
- Brass Magazine Follower Buttons
- Ultimate Trigger Kit and Blast Pack
- TandemKase Pistol Bag