At a Glance:
- Upgraded pins won’t fall out when working on your rifle
- Spring-loaded ball detent holds pin in place securely and installs easily
- Highly durable steel
If you’ve upgraded your Ruger® 10/22® with aftermarket parts and taken apart your trigger housing sub-assembly, it’s likely you’ve experienced just how easily the receiver cross pins can fall out of the sub-assembly. It’s easy to lose these important pins while working on your gun - a loss that can easily derail a day at the range or even firearms competition while you wait for replacement parts.
Put a stop to lost receiver cross pins with the new upgraded 10/22® receiver cross pins from TANDEMKROSS. These upgraded galvanized steel pins are highly durable and feature a spring-loaded ball detent that holds the pins securely in place inside the sub-assembly but still allow for easy insertion and removal for working on your rifle.
These upgraded 10/22® receiver cross pins are a must-have for any Ruger® 10/22® owner who loves to work on and upgrade their gun! Put a stop to missing pins and make firearms maintenance easier. Stock up now!
Specifications:
- Height: 0.07"
- Width: 0.09"
- Length: 0.83"
- Weight: 0.075oz
- Material: Steel, black oxide coated
Supported Models:
- Ruger® 10/22®
- Ruger® 10/22® Takedown
- Ruger® 10/22® Takedown LITE
- Ruger® 10/22® Charger
- Thompson Center T/CR 22
This product is protected against mechanical failure for life by TANDEMKROSS’s Lifetime Guarantee. Learn more about our warranty and returns policies here.
⚠️ WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
133 Reviews
-
Excellent
Used these pins for my takedown Brownells receiver, worked perfectly. Able to push them in by hand. Out with an Allen wrench but holds strong
-
KrossPins for Ruger 10/22
I don’t take my Ruger 10/22 apart often enough to need these pins, but I switched out all the internals for Tandemkross products (ultimate trigger kit; mag release; bolt release), so I decided I might as well use their pins also. Tandemkross makes excellent products. I wish they made upgrades for every firearm I own. Nice going, Tandemkross crew!
-
Awesome
Worked great on the BX trigger but overly tight on the Kidd System. Which is good I guess.
-
Ordered the Wrong Part, my error
I've dealt with many customer service people in the past and undoubtedly these people are the most professional I have ever dealt with. My last order with them, I mistakenly ordered the wrong Ruger Receiver Pins, ones for the Carbine, thinking they were for the 10/22. I emailed Customer Service, once I discovered these pins were slightly longer than the Receiver Pins for my 10/22. Jan, with Customer Service promptly replied and sent the correct pins the day I contacted them, including a prepaid Return Label! The return of the old part was so simple by using their own package and the printed return label to stick on. Took no more than a couple of minutes.
-
Awesome
These are awesome replacing my wife's next week
-
Awesome
Very nice!! They will stay in place!!
-
OK
One original pin in my rifle was loose, the other stayed put. The KrossPin fit well in the loose hole, was too tight for the other. Ended up using one KrossPin and one original.
-
Mr.
These have solved the problem with the receiver cross pins falling out every time I disassemble my 10/22. These fit snug but yet are easy to remove. Good product.
-
Pins work great for the Ruger.22
I replace these pins from the factory ones in the little ball in spring hold them in place and I don’t have to worry about the factory ones falling out. I would definitely recommend them!
