At a glance:
- Flat-faced, skeletonized design for better control and feel
- Textured trigger face offers a no-slip grip in any condition
- 100% adjustable for pre-travel and post-travel
The factory KelTec® trigger stands out in the rimfire market for its crisp feel and light trigger pull. But even good triggers can be made GREAT! The TANDEMKROSS Victory Trigger for the KelTec® CP33™, compatible also with the PMR30™ and the CMR30™ is the ultimate KelTec® upgrade, ideal for speed shooting competitors!
The TANDEMKROSS Victory Trigger is pre- and post-travel adjustable to allow each shooter to customize their CP33™, PMR30™ and/or CMR30™ trigger upgrade.
The skeletonized, lightweight design of the TANDEMKROSS Victory trigger provides a flat face that allows the shooter to pull straight back and makes it easier to tell if they are pulling too far to the left or right. In addition to actually reducing the trigger pull weight by up to .5lbs, the flat-faced design also allows the operator to place their finger lower on the trigger, increasing leverage and giving the perception of an even lower pull weight.
The textured Victory Trigger provides a no-slip surface regardless of speed or weather and allows for short, repeatable, identical trigger pulls. The trigger is made from aircraft-grade aluminum to be lightweight and durable.
The TANDEMKROSS KelTec® Victory Trigger for KelTec® CP33™, CMR30™ and PMR30™ is one of the best KelTec® upgrades for competition shooters. Get yours today and take a giant step closer to VICTORY!
⚠️ WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.22 Reviews
-
CP33 Easy
I have yet to shoot with the trigger install. Installation was easy with my CP33, I watch the video several time while waiting for it to arrive. I suggest Loctite 290 wicking due to the fact you can't remove the pre-travel set screw once you have install the trigger. Only complaint, the aluminum threads seem loose to the set screw. Can wait till I'm able to get to the range
-
Victory Trigger
I had never replaced a trigger before, and the installation was really quite simple. I was able to split the case and keep the spring and feed ramp intact on the left side. I have put over 500 rounds downrange after installing the trigger, and it works as advertised. However, the pre-travel screw would un-screw from the trigger and not allow enough take up to fire the gun. The screws are not tight tolerances and feel 'loose' in the threaded trigger hole. I used blue thread lock to help keep the screw from walking out, and that seems to have fixed the issue. The other thing is that there is no trigger reset, and some may not like that. My CP33 has been a lot of fun to shoot, and it is very accurate. If Tandem Kross would tighten the tolerances of the screws it would be 5 stars all day.
-
Love my PMR30 now.
Added this Tandemcross trigger and some additional parts to improve feeding from MCARBO. Now I can really enjoy the pistol.
-
Trigger
The over travel screw isn't long enough for the cmr-30. It unscrewed and came out after the first magazine on the range and was lost. The reset screw is NOT reachable on the cmr-30 even when the trigger is fully pulled. Cannot adjust. Otherwise it feels a little better than the stock trigger.
-
Victory Trigger Kel Tec PMR 30
Made the trigger response so much better. Easy video to install, the adjustments was easy to reach. It made my PMR 30 so much better at the range !
-
Trigger
Great upgrade ??
-
Trigger
Solid trigger. Very nice pull and clean break.
-
Upgrade
Install is a pain, but the trigger has an instant increase in function of the CMR. I highly recommend. My only gripe would be that the adjustment screws have almost no land, and each one is probably grabbing on 2 threads. But I am overall satisfied.
-
KelTec Trigger
Instructions were very good. Don't be in a hurry and review the online videos a couple of time before installing. I had no problems getting everything back together but it can be a bit challenging. Be patient. Looks great. The small travel screws serve no purpose on the CP33. The trigger travel is not far enough for the screws to make contact with the housing, even when fully extended. No big deal to me. Combined with other accessory items, makes the CP33 look great!
