At a glance:
-
Flat-faced, skeletonized design for better control and feel
-
Textured trigger face offers a no-slip grip in any condition
-
100% adjustable for pre-travel and post-travel
The factory KELTEC trigger stands out in the rimfire market for its crisp feel and light trigger pull. But even good triggers can be made GREAT! The new TANDEMKROSS Victory Trigger for the KELTEC CP33™, compatible also with the PMR30™ and the CMR30™ is the ultimate KELTEC upgrade - ideal for speed shooting competitors!
The TANDEMKROSS Victory Trigger is pre- and post-travel adjustable to allow each shooter to customize their CP33™, PMR30™ and/or CMR30™ trigger upgrade.
The skeletonized, lightweight design of the TANDEMKROSS Victory trigger provides a flat face that allows the shooter to pull straight back and makes it easier to tell if they are pulling too far to the left or right. In addition to actually reducing the trigger pull weight by up to .5lbs, the flat-faced design also allows the operator to place their finger lower on the trigger, increasing leverage and giving the perception of an even lower pull weight.
The textured Victory Trigger provides a no-slip surface regardless of speed or weather and allows for short, repeatable, identical trigger pulls. The trigger is made from aircraft-grade aluminum to be lightweight and durable.
The TANDEMKROSS KELTEC "Victory" Trigger for KELTEC CP33™, CMR30™ and PMR30™ are one of the best KELTEC upgrades for competition shooters. Get yours today and take a giant step closer to VICTORY!
![](https://www.tandemkross.com/assets/images/Prop65_Graphic.png)
20 Reviews
-
Cmr30 teigger
Great trigger and easy install.only down side is that the travel screw sticks way out and kinda floppy.easy fix glue 1/8 inch thick plastic to gun for a pad and screw dosent have to be so far out.also a dab of glue on the threada helps alot.over all great product.i just suggest adding a plastic piece in kit for cmr30 so you can take up some space
-
Kel-Tec Victory Trigger
I have two of these triggers now, one in a PMR-30 and one in a CMR-30. I like the flat face; it doesn’t actually lower the pull weight, but the “feel” is better in my opinion. More importantly, the pre-travel really improves the feel and function of the system while still remaining safe, and the over-travel adjustment improves the trigger feel as well. I would like to see a bit more material holding the over-travel screw, but loctite seems to keep it in place well enough.
-
Victory Trigger CP33
A tricky installation made easy with the accompanying video! This trigger upgrade for the CP33 makes a good trigger into an awesome trigger.
-
Cp33 trigger
Functionality great sturdy product nice touch to add color as well
-
Victory Trigger
Very easy to install...super consistent feel...a must have...don’t be a cheap scape buy yourself some satisfaction...
-
Victory Trigger For KelTec CP33
A very well made product, with excellent customer support. Reduction in creep was the main benefit of this trigger. Felt trigger weight stays about the same.
-
Victory trigger
First time I tried a straight trigger - it affected my accuracy with the PMR-30 so I sent it back for a refund. It was easy to put in and take out and I liked the serrations but just didn't work for me...... Tandeemkross was great about the refund! No problems.....
-
CP33 Easy
I have yet to shoot with the trigger install. Installation was easy with my CP33, I watch the video several time while waiting for it to arrive. I suggest Loctite 290 wicking due to the fact you can't remove the pre-travel set screw once you have install the trigger. Only complaint, the aluminum threads seem loose to the set screw. Can wait till I'm able to get to the range
-
Victory Trigger
I had never replaced a trigger before, and the installation was really quite simple. I was able to split the case and keep the spring and feed ramp intact on the left side. I have put over 500 rounds downrange after installing the trigger, and it works as advertised. However, the pre-travel screw would un-screw from the trigger and not allow enough take up to fire the gun. The screws are not tight tolerances and feel 'loose' in the threaded trigger hole. I used blue thread lock to help keep the screw from walking out, and that seems to have fixed the issue. The other thing is that there is no trigger reset, and some may not like that. My CP33 has been a lot of fun to shoot, and it is very accurate. If Tandem Kross would tighten the tolerances of the screws it would be 5 stars all day.