At a Glance:
- Hardened tool steel for long life
- Improved claw geometry for reliability
- Replaces lost or damaged factory part
The Eagle’s Talon Extractor for Walther® P22® is a reliable upgrade that replaces the factory extractor. The Eagle’s Talon extractor features improved claw geometry to maintain a secure hold on the case that prevents stove-pipes, failures to eject, or failures to extract. The TANDEMKROSS Eagle's Talon Extractor is machined from hardened tool steel to ensure durability.
Eliminate your frustrations at the range with the Eagle’s Talon Extractor for Walther® P22®!
Supported Models:
- Walther® P22®
- Walther® P22®Q
- Walther® P22®CA
TANDEMKROSS firing pins, extractors, and springs are protected against mechanical failure for two years after the time of purchase. Learn more about our warranty and return policies here.
WARNING: This product can expose you to chemicals including cadmium, which is known to the State of California to cause reproductive harm. For more information go to www.P65Warnings.ca.gov
19 Reviews
-
Totally Impressed!
For my Walther P22 CA, I just purchased and installed the TK Eagle's Talon Extractor, the Sentinel Captured Spring Guide Rod, and the Fire Starter Firing pin. I used this websites video to accomplish the install. Today at the range, I fired 180 rounds in approximately 20 minutes, and not one single hiccup. It cycled flawlessly. I really enjoy this little plinker despite the expected occasional FTE, FTF, and Stovepipe. I think most of these issues were being caused by the OEM Extractor. Today, with the TK components, my P22 was an animal just eating rounds and spitting them out. Shell cases were being ripped out and flung aside with noticeable velocity and flawless consistency by the Eagle Talon Extractor. I believe this extractor eliminated my stove piping and FTE, and FTF issues. Totally Impressed.
-
Extractor for Walter P22
Fast shipping, install extractor. Should have pushed pin from the bottom, not all the way out. Works fine,
-
Worked Like A Charm
I bought a used P22 from Turners and sure enough it wouldn’t shoot or extract any ammo. I bit the bullet and ordered an extractor, stainless guide rod and fire stricker. The P22 now is able to shoot and cycle ammo. Awesome!
-
Eagle Tallon Extractor
Product was delivered very fast after ordering. The Eagle Tallon Extractor was easy to install in my Walther P22. After running a magazine through it to function check, it works flawlessly. Completely fixed the extraction problems and ejected the spent casings to the side where they should go. I will be purchasing more Tandemkross products in the future to replace parts in other firearms.
-
Good product
Easy to install. Good instructional video under the product description. I have this, new firing pin and spring all from TK. All three made a great improvement on my 1st Gen P22. She's a snappy little pistol now.
-
EAGLE’S TALON EXTRACTOR FOR WALTHER®
Works great ‼️‼️
-
Next level extractor
I've had my P22 for 20+ years, probably only put 1000 rounds or so through it due to lack of ranges, deployments,etc, but it always functioned well. Until I decided to teach my kids gun safety and the extractor started failing. I changed ammo, deep cleaned it, and tried increasing spring tension myself. While it made my P22 a little better on some ammo, it wasn't 100%. This extractor took me ten minutes to install and just racking the slide to test the problematic ammo made it apparent this upgrade was worth it. Excellent extractor! Here's to another 20 years with it for my kids.
-
Eagle's Talon Extractor for Walther P22Q
The extractor, extra power spring, and roll pin were all top quality and easy to install. It was an improvement for my pistol!
-
works great, fixed the problem
great service, works great
