"Eagle's Talon" Extractor for Browning® Buck Mark TANDEMKROSS

"Eagle's Talon" Extractor for Browning® Buck Mark

TANDEMKROSS

$12.99
(72 reviews) Write a Review
SKU:
1712N0141BLK1
Weight:
0.30 LBS
Adding to cart… The item has been added

"Eagle's Talon" Extractor Installation Instructions for the Browning Buck Mark

At a glance:

  • Machined from hardened tool steel to last a lifetime

  • Sharp "hook" design grabs casings securely and surely

  • Reduces failures-to-eject and "stove-pipe" malfunctions

The TANDEMKROSS "Eagle's Talon" Extractor for Browning® Buck Mark is a much-needed reliability upgrade that replaces the factory-provided BuckMark extractor. The factory extractor often can’t maintain a secure enough hold on the spent casing as the pistol is cycling, causing stove-pipes and failures-to-eject malfunctions. TANDEMKROSS "Eagle's Talon" Extractor is CNC-machined with a positive hook that will grab and secure each round until it needs to be ejected.

While the factory extractor can chip- reducing its ability to consistently extract spent casings- the “Eagle’s Talon” extractor upgrade is machined from hardened tool steel for long-term strength and durability.

Eliminate your frustrations at the range and during speed shooting competitions with the “Eagle's Talon" Extractor for Browning® Buck Mark!

*Fits all Buck Mark models including the Buck Mark Rifle
 
Don't forget, all TANDEMKROSS products are Made in the USA and come with a LIFETIME guarantee!
WARNING: This product can expose you to chemicals including cadmium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

72 Reviews

  • 5
    average guy

    Posted by john on 14th Jun 2017

    Buckmark was failing to extract, dropping spent cases causing stove pipes...total nightmare. Inspection showed the factory extractor didn't hold the case firmly and had zero tension as it could be tipped 0.050" before moving the plunger. Swapped in the tandemkross part, which took about 1 minute! Instantly could see it sat closer to the breech so the cases would be tighter. Also saw any motion of the extractor was resisted by the plunger. The hook is also sharper. Ran 30 rounds with 20 as fast as possible (0.15 splits) and had zero failures. Best 10 bucks you can spend to make a buckmark reliable.

  • 5
    Owner of My gun guy

    Posted by Tom Atkins on 10th Jun 2017

    quality made product, a little polishing and customer gun was ready to rock and roll

  • 5
    Great Product

    Posted by Daniel Dubek on 9th May 2017

    Installed the extractor in my Browni g Buck Mark. Installation was easy and the product worked as advertised.

  • 5
    Works great

    Posted by Bruce on 7th May 2017

    Very well made part. No more stuck cases or stove piping

  • 5
    FtEj No More!

    Posted by Jeff82 on 20th Apr 2017

    I was getting 10% ftej on my stock Buck Mark. Cleanliness made no difference. Installed the Eagle's Talon and I've had one in hundreds of rounds. Miraculous!

  • 5
    Mr

    Posted by RONALD on 11th Feb 2017

    I have found that tandemkross products are excellent and really make shooting more fun as well as increase the effectency of your personel gun.

  • 5
    Eagles Talon Really Works

    Posted by Scott Dillon on 2nd Jan 2017

    I have had numerous FTE's on my Buck Mark. Installing the talon has eliminated them. It installs easily, and the fit and finish is great. It has really improved the performance of the pistol. An installation video would have been helpful, but I did find a video made by a user on YouTube.

  • 5
    na

    Posted by Mike S. on 8th Dec 2016

    Great extractor! Will even extract spent .22 cal. shell that I use as snap caps!

  • 5
    Casual Shooter

    Posted by Kevin Nguyen on 7th Nov 2016

    Drops right in my Buckmark Micro URX (2016). Ran 1000 rounds of Federal Auto Match without a single hiccup.

!