"Eagle's Talon" Extractor Installation Instructions for the Browning Buck Mark
At a glance:
-
Machined from hardened tool steel to last a lifetime
-
Sharp "hook" design grabs casings securely and surely
-
Reduces failures-to-eject and "stove-pipe" malfunctions
The TANDEMKROSS "Eagle's Talon" Extractor for Browning® Buck Mark is a much-needed reliability upgrade that replaces the factory-provided BuckMark extractor. The factory extractor often can’t maintain a secure enough hold on the spent casing as the pistol is cycling, causing stove-pipes and failures-to-eject malfunctions. TANDEMKROSS "Eagle's Talon" Extractor is CNC-machined with a positive hook that will grab and secure each round until it needs to be ejected.
While the factory extractor can chip- reducing its ability to consistently extract spent casings- the “Eagle’s Talon” extractor upgrade is machined from hardened tool steel for long-term strength and durability.
Eliminate your frustrations at the range and during speed shooting competitions with the “Eagle's Talon" Extractor for Browning® Buck Mark!
WARNING: This product can expose you to chemicals including cadmium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.72 Reviews
-
HMFIC
Have your balls not dropped? Has your man-gina been unusually itchy? Has all that soy got you picking out a lovely sundress for summer? Well stop that and order these Eagle Talons today. I have 4 Browning Buckmarks and i came across these Eagle Talons and let me tell you I can almost hear eagles cawwwing in the background when I shoot my Buckmarks now. All shells are are ejecting flawlessly best and cheapest upgrade you can do for your Buckmark. So nut-up and order one today.
-
Fixed the extraction problems
I have been having troubles with failed extraction and stovepipes with the Federal 1200fps target ammo. I shoot Bullseye competition, and it was common to get maybe 1 or 2 failures per 100 rounds fired. I installed the Eagle's Talon extractor a few weeks ago. So far, after a month of shooting Bullseye competition, I have not had a single extraction failure. Hopefully that means the problem is permanently solved. It was easy to install, and I am very happy!
-
Extractor / Firing Pin
I experienced extractor problems during Rimnfire & Steel Challenge events. Turned out the hook was slightly dull. The Talon extractor solved my problem. I was also experiencing failure to fire - the firing pin was dull so I replaced it with the Tandemkross firing pin which solved that problem. Installation of both products was simple. Delivery of both products was timely and my correspondence with the company was answered promptly. Tandemkross is my 1st stop for Browning Buckmark parts.
-
Extractor
As described and easy install
-
Competitive Shooter
I was having some extraction issues with my Buckmark and after installing the Eagle's Talon extractor they went away immediately. You can tell the difference in the factory part and this replacement. A must have, especially for the $ if you have a Buckmark!
-
Mr.
Excellent product, I just polished the curve and sides of the claw to reduce friction against the slide. Very easy installation, 5 minutes.
-
Eagles extractor
With this extractor i am having problems,seams like in my case came a little bit biger than the original, and every time when firing the slide won't close all the way,and it won't fire. I endedup installing the original again.
-
mr
It works. Was having lots of stovepipes in my new Buckmark. This cured it. Runs like a sewing machine now. Too bad you have to spend extra to get your Browning or Ruger to run sometimes, but at least a new extractor is a relatively small expense
-
Eagle's Talon Extractor for Browning Buck Mark
The Eagle's Talon Extractor appears to be very well made. It was relatively easy to install and so far no extraction issues. Keep up the good work!
