"Eagle's Talon" Extractor Installation Instructions for the Browning Buck Mark
At a glance:
-
Machined from hardened tool steel to last a lifetime
-
Sharp "hook" design grabs casings securely and surely
-
Reduces failures-to-eject and "stove-pipe" malfunctions
The TANDEMKROSS "Eagle's Talon" Extractor for Browning® Buck Mark is a much-needed reliability upgrade that replaces the factory-provided BuckMark extractor. The factory extractor often can’t maintain a secure enough hold on the spent casing as the pistol is cycling, causing stove-pipes and failures-to-eject malfunctions. TANDEMKROSS "Eagle's Talon" Extractor is CNC-machined with a positive hook that will grab and secure each round until it needs to be ejected.
While the factory extractor can chip- reducing its ability to consistently extract spent casings- the “Eagle’s Talon” extractor upgrade is machined from hardened tool steel for long-term strength and durability.
Eliminate your frustrations at the range and during speed shooting competitions with the “Eagle's Talon" Extractor for Browning® Buck Mark!
![](https://www.tandemkross.com/assets/images/Prop65_Graphic.png)
72 Reviews
-
Review.
Excellent product. Recommended.
-
Great
The stock extractor on my brand new buckmark would fail to eject one or two casings per mag. The TK extractor makes the gun run 100% reliably now. I did have to slightly dress the leading edge of the hook to prevent it from jamming on a new round as it was being fed into the chamber. This little bit of amateur gunsmithing (with the excellent help of TK support) has the gun running like a champ now. Very pleased with this purchase.
-
Great product
Installed it then went out and put 50 rounds through my browning buckmark. No FTE s finally! In the 50 rounds I had about 6 different brands of ammo all cheap leftovers that didn t work before.
-
buckmark extractor
I had FTE/failure to eject on my brand new Buckmark less than 300 rds, I came across a post on utube which recommended your extractor pin to fix the problem, I ordered one used your description of how to replace and easily replaced the pin, and fixed the problem I really appreciate a off market vendor specializing in my brand of gun, love my Buckmark Browning needs to use your extractor pins made out of titanium from the factory, instead of cheap parts. Thanks for the help..
-
Eagle talon
Works perfect as described. The eagle talons are easy to install after watching Tandemkross video instructions. Tandemkross also has a expert customer service department for your needs.
-
Not sure about this mod
Got the extractor to see if it will help with failure to extract on some ammo (only the Norma Tac 22), other ammo runs fine in my new Camper with the stock extractor. This extractor had almost every second round failing to feed, it pushed the round upwards. Had to sand the bottom of the extractor a bit to make it work correctly. Seems to work well now after sanding the bottom corner and polishing the top and bottom. Needs a bit more testing, but this part didn't work as a drop in.
-
Talon Extractor
Easy installation. Eliminated my FTE issues.
-
Extractor
Beefy ??
-
Sharp Extractor
I saw this part on Tandemkross website while picking up something else, I passed by it several times thinking not necessary, purchased several items, while installing the gear box, I started looking at the edge of my extractor and realized it's rounded! went back and watched the video to see what it said about the benefits of the eagle's talon, also identified the ease of install and again for the price, to upgrade a part at a reasonable price to aid in better reliability, performance, why not!! This part is a know brainer, my gun has always performed, but holding the parts side by side, you can see the difference, for the price, this is a part everyone should install. I looked at all four of my Buckmark pistols, three had rounded edges, so guess what, replaced them. Happy Shooting