At a Glance:
- Machined from hardened tool steel to last a lifetime
- Unique positive “hook” design grabs casings securely and surely
- Reduces failures-to-eject and “stove-pipe” malfunctions
- TANDEMKROSS LIFETIME guarantee
The TANDEMKROSS Eagle’s Talon Extractor for Ruger® MK™ Series is a much needed reliability upgrade that replaces the stamped factory provided extractor. Often the factory extractor won't maintain a secure enough hold on the spent casing as the pistol is cycling and will case stove-pipes and failures-to-eject malfunctions. Luckily with this simple to install and affordable upgrade, you can greatly improve the reliability of your firearm! TANDEMKROSS "Eagle's Talon" Extractor is correctly machined with a positive hook that will grab and secure each round until it needs to be ejected. Eliminate your frustrations at the range with a much better part that will throw your spent cases far away from ever causing another failure-to-eject!
Supported Firearms:
- Ruger® Mark I™
- Ruger® Mark II™
- Ruger® Mark II™ 22/45™
- Ruger® Mark III™
- Ruger® Mark III™ 22/45™
- Ruger® Mark III™ 22/45™ LITE
- Ruger® Mark IV™ Target
- Ruger® Mark IV™ Hunter
- Ruger® Mark IV™ Competition
- Ruger® Mark IV™ Tactical
- Ruger® Mark IV™ 22/45™
- Ruger® Mark IV™ 22/45™ Tactical
- Ruger® Mark IV™ 22/45™ LITE
WARNING: This product can expose you to chemicals including cadmium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.152 Reviews
-
Eagle’s Talon
This is an absolute must have for the Ruger MK pistol. This combined with the Fire Starter firing pin is basically a cure all for FTF, FTE as long as you are using decent bulk pack ammo or better. Both items installed in under five minutes using a small paperclip.
-
Mrs
Received this product quickly. It was easy to install and runs great in my gun.
-
Steel Shooter
I was having issues with the stock extractor, I replaced it with this one, and it has some issues every once in awhile. I am going to clean mags and try different brands of ammo to see what the issue is. It has reduced extraction issues though.
-
Extractor
FTE on a couple of rounds but no issues for 1k plus rounds after initial installation.
-
Eagle's claw extractor
I have put a couple thousand rounds out of two guns with these installed and it has never failed even with junk ammo!!!Bottom line like other T/K parts they work great. Thanks T/K team
-
Owner
No more extraction problem and firing pin works great.
-
Tech
fit was perfect and works great
-
so far not one FTE
Some Mark 111 and Mark1Vs eat ammo and never complain, some don't and mine was one of those. We smoothed all the mags, took out the ejector, sharpened and smoothed to no avail. Sending back to Ruger was not an option as it would just come back with a factory ejector. The Eagles Talon has not missed a beat in my first 200 rounds of CCI mini mag 1260 fps ammo, same as I used before. It makes shooting so much more friendly and no alibis when shooting Bulls eye competition. The best $10.00 I ever spent.
-
OK, Maybe
Installed this extractor in my Ruger MklV Hunter, according to the procedures that were sent. Had a bit of difficulty getting the original out, but finally succeeded. Test fired with two different very old ammos. "Fed Gold Medal Target" and "PMC Scoremaster". The PMC ran perfectly but the Gold Medal had multiple failures to extract, completely. I could feel a distinct difference in the recoil of the two loads with the GM being very weak. Suspect bad ammo but will have to do more testing to confirm.
