Eagle’s Talon Extractor for Ruger® MK Series Internals

Eagle’s Talon Extractor for Ruger® Mark™ Series

TANDEMKROSS

$12.99
(149 reviews) Write a Review
SKU:
TK05N0012SSL1
Weight:
0.30 Ounces
Adding to cart… The item has been added

 
 

At a Glance:

  • Machined from hardened tool steel to last a lifetime
  • Unique positive “hook” design grabs casings securely and surely
  • Reduces failures-to-eject and “stove-pipe” malfunctions
  • TANDEMKROSS LIFETIME guarantee

The TANDEMKROSS Eagle’s Talon Extractor for Ruger® MK™ Series is a much needed reliability upgrade that replaces the stamped factory provided extractor.  Often the factory extractor won't maintain a secure enough hold on the spent casing as the pistol is cycling and will case stove-pipes and failures-to-eject malfunctions.  Luckily with this simple to install and affordable upgrade, you can greatly improve the reliability of your firearm!  TANDEMKROSS "Eagle's Talon" Extractor is correctly machined with a positive hook that will grab and secure each round until it needs to be ejected.  Eliminate your frustrations at the range with a much better part that will throw your spent cases far away from ever causing another failure-to-eject!

Supported Firearms:

 

  • Ruger® Mark I™
  • Ruger® Mark II™
  • Ruger® Mark II™ 22/45™
  • Ruger® Mark III™
  • Ruger® Mark III™ 22/45™
  • Ruger® Mark III™ 22/45™ LITE
  • Ruger® Mark IV™ Target
  • Ruger® Mark IV™ Hunter
  • Ruger® Mark IV™ Competition
  • Ruger® Mark IV™ Tactical
  • Ruger® Mark IV™ 22/45™
  • Ruger® Mark IV™ 22/45™ Tactical
  • Ruger® Mark IV™ 22/45™ LITE

 

Don't forget, all TANDEMKROSS products are Made in the USA and come with a LIFETIME guarantee!
WARNING: This product can expose you to chemicals including cadmium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

149 Reviews

  • 5
    rock solid

    Posted by sam on 11th Sep 2016

    This part worked flawlessly with a suppressed pistol with no hiccups for a couple of hundred rounds. Highly recommended.

  • 5
    extractor review

    Posted by Jamie Green on 15th Aug 2016

    Installed new extractors in both Ruger 22/45's - so far they are running terrific - no jams......

  • 5
    Mr.

    Posted by Tim finger on 3rd Aug 2016

    Very high quality product.This was my fourth order for my 22/45 . Easy to follow instructions and perfectly machined parts.

  • 5
    Great item

    Posted by Scott on 16th Jul 2016

    Drops right in. Installation video made it easy. Extractor grabs and throws 100%

  • 5
    Quality item, works as intended.

    Posted by Alex on 11th Jul 2016

    Can clearly tell by comparing with the stock extractor that this is a precision made part. Solved my occasional FTE issues!

  • 5
    Sharp and precisely cut

    Posted by Robert on 8th Jul 2016

    Replaced my original extractor and checked them out under a magnifying glass and the original one was worn rounded on one side. this one is sharp and square. This should help with the occasional FTE's.

  • 5
    Easy Upgrade Reduces FTEs

    Posted by Stan T on 8th Jul 2016

    Installed this extractor on my 22/45 and 10-22 rifle. Immediately noticed improvement on both guns. FTE/FTF dropped to ALMOST 0. Still have that issue with bad ammo, but at least I know the gun is doing it's job with the Tandemkross parts installed. Great product and great service from Tandemkross.

  • 5
    Shooter - steel challange

    Posted by Alfred Anderson on 5th Jul 2016

    Great product much sharper than the stock extractor. Easy to install in my two MK III 22/45's and has not had a failure in the first 1,000 rounds. It does tend to strip the rims off of plastic snap caps so be careful and insure a broken snap cap does not get pushed into the barrel by a second snap cap.

  • 5
    MKIII

    Posted by BM on 4th Jul 2016

    The extractor just great quality and much better than ruger's - I realize after replacemet. Five Star TANDEMKROSS

!