At a Glance:
- Machined from hardened tool steel to last a lifetime
- Unique positive “hook” design grabs casings securely and surely
- Reduces failures-to-eject and “stove-pipe” malfunctions
- TANDEMKROSS LIFETIME guarantee
The TANDEMKROSS Eagle’s Talon Extractor for Ruger® MK™ Series is a much needed reliability upgrade that replaces the stamped factory provided extractor. Often the factory extractor won't maintain a secure enough hold on the spent casing as the pistol is cycling and will case stove-pipes and failures-to-eject malfunctions. Luckily with this simple to install and affordable upgrade, you can greatly improve the reliability of your firearm! TANDEMKROSS "Eagle's Talon" Extractor is correctly machined with a positive hook that will grab and secure each round until it needs to be ejected. Eliminate your frustrations at the range with a much better part that will throw your spent cases far away from ever causing another failure-to-eject!
Supported Firearms:
- Ruger® Mark I™
- Ruger® Mark II™
- Ruger® Mark II™ 22/45™
- Ruger® Mark III™
- Ruger® Mark III™ 22/45™
- Ruger® Mark III™ 22/45™ LITE
- Ruger® Mark IV™ Target
- Ruger® Mark IV™ Hunter
- Ruger® Mark IV™ Competition
- Ruger® Mark IV™ Tactical
- Ruger® Mark IV™ 22/45™
- Ruger® Mark IV™ 22/45™ Tactical
- Ruger® Mark IV™ 22/45™ LITE
WARNING: This product can expose you to chemicals including cadmium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.149 Reviews
-
don't hesistate to buy
I had no problems with my MKIII 22/45 with standard velocity ammo when I was just getting things sighted in. I switched to high-velocity and immediately had FTE's every other round. I installed the Talon extractor and my malfunctions disappeared. HUGE difference. I just bought a Ruger 10/22 takedown..and didn't even hesitate to order the talon extractor for that model, before even taking it out for my first shoot with it.
-
Mr
Just Buy the VQ extractor. This one performed no better than oem in my 22/45 Mk Iv
-
It's a shame
It's a shame that this quality of an extractor doesn't come from the factory on a five hundred dollar target pistol.
-
money well spent
These purchases from TK were my first,extractor,ti firing pin and rebound springs,volquartsen sear and victory trigger. All were easy to install and made an amazing improvement on a 20 year old MK2. Just started shooting rimfire bullseye and my scores have gone up dramatically, GET SOME!
-
Boss
Works great as expected.
-
Flawless solution
Well machined and excited. Much harder than the factory extractor resulting in consistent performance. All the ejected cartridge cases now land in a little pile. :D
-
owner/chief instructor
Extractor is well made, easy to install and works flawlessly.
-
Eagle Talon and other upgrades
I was having occasional problems with failure to feeds, failure to ejects, and light strikes out of my Ruger MKIII. So I did a little research and decided to take a chance on fixing it myself. I installed the following components: Volquartsen Firearms Target Sear Part Number:3304N0151SSL1 "Eagle's Talon" Extractor Part Number:1705N0012SSL1 Steel Hammer Bushing Part Number:TK04N0002SSL1 "Fire Starter" Titanium Firing Pin Part Number:TK05N0011SSL1 LCI Replacement Insert - Black Part Number:TK04N0003BLK1 The steel hammer bushing was to get rid of the trigger-magazine interlock. Installation was simple, except for the sear. I have big fingers and parkinson's and could the sear is really slick. I had to use a pair of tweezers to hold the sear and the video is sort of iffy on the spring install. Everything else, just follow the videos. Measurements on trigger put dropped from 4 pounds 1 oz. to 1 pound 9 oz. In 250+ rounds fired after the parts replacement, there wasn't a single failure to feed or failure to eject. I did have two misfires. I believe these to be complete duds instead of misfires. I cycled the bullets through again and they still did not fire. And to be fair, the ammo was more than 20 years old. In any case, I consider this to be a successful remediation of problems with my MKIII and it is now much more reliable and less frustrating to shoot. There were no failures of any kind with ammo that purchased within the last decade.
-
BUY IT
NO JAMS NOW!!!
