Eagle's Talon Extractor Installation Instructions for the Browning Buck Mark
At a glance:
- Machined from hardened tool steel to increase longevity
- Sharp hook design grabs casings securely and surely
- Reduces failures-to-eject and stove-pipe malfunctions
The TANDEMKROSS Eagle's Talon Extractor for Browning® Buck Mark is a reliability upgrade that replaces the factory-provided Buck Mark extractor. The factory extractor often can’t maintain a secure enough hold on the spent casing as the pistol is cycling, causing stove-pipes and failures-to-eject malfunctions. TANDEMKROSS Eagle's Talon Extractor is CNC-machined with a positive hook that will grab and secure each round until it needs to be ejected.
While the factory extractor can chip, reducing its ability to consistently extract spent casings, the Eagle’s Talon extractor is machined from hardened tool steel for long-term strength and durability.
Eliminate your frustrations at the range and during speed shooting competitions with the Eagle's Talon Extractor for Browning® Buck Mark!
Supported Models:
- Browning® Buck Mark
- Browning® Buck Mark Rifle
⚠️ WARNING: This product can expose you to chemicals including cadmium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.74 Reviews
-
Buckmark
I shoot CMP Bullseye every Wednesday. And my Buckmark is about 12 years old,and started having a problem ejecting a round. I ordered Tandemkross ejector,easy install, and my Buckmark runs like brand new. Thank You Tandemkross for your many quality products.
-
"Eagle's Talon" Extractor for Browning® Buck Mark
On the first trip to range my brand new Browning Buck Mark worked perfectly with several brands of ammo but consistently failed to either feed or eject Norma TAC 22 ammo. After replacing the extractor with the "Eagles Talon" , it would not feed any ammo. I discovered the case rims were getting caught between the sharp edge of the extractor hook and the bolt face. I used some sandpaper glued to a popsicle stick and a felt polishing bob on a Dremel tool to slightly round over and polish the extractor. The function is now better but still not 100%. I will try polishing more but it's hard to tell how much is enough. This is just MY experience on MY particular pistol. YMMV.
-
Review.
Excellent product. Recommended.
-
Great
The stock extractor on my brand new buckmark would fail to eject one or two casings per mag. The TK extractor makes the gun run 100% reliably now. I did have to slightly dress the leading edge of the hook to prevent it from jamming on a new round as it was being fed into the chamber. This little bit of amateur gunsmithing (with the excellent help of TK support) has the gun running like a champ now. Very pleased with this purchase.
-
Great product
Installed it then went out and put 50 rounds through my browning buckmark. No FTE s finally! In the 50 rounds I had about 6 different brands of ammo all cheap leftovers that didn t work before.
-
buckmark extractor
I had FTE/failure to eject on my brand new Buckmark less than 300 rds, I came across a post on utube which recommended your extractor pin to fix the problem, I ordered one used your description of how to replace and easily replaced the pin, and fixed the problem I really appreciate a off market vendor specializing in my brand of gun, love my Buckmark Browning needs to use your extractor pins made out of titanium from the factory, instead of cheap parts. Thanks for the help..
-
Eagle talon
Works perfect as described. The eagle talons are easy to install after watching Tandemkross video instructions. Tandemkross also has a expert customer service department for your needs.
-
Not sure about this mod
Got the extractor to see if it will help with failure to extract on some ammo (only the Norma Tac 22), other ammo runs fine in my new Camper with the stock extractor. This extractor had almost every second round failing to feed, it pushed the round upwards. Had to sand the bottom of the extractor a bit to make it work correctly. Seems to work well now after sanding the bottom corner and polishing the top and bottom. Needs a bit more testing, but this part didn't work as a drop in.
-
Talon Extractor
Easy installation. Eliminated my FTE issues.
