Victory Trigger for Ruger® Mark IV

The trigger, itself, is what you would expect from a precision trigger. It's lightweight, looks good, feels okay, and appears durable. Design is near-perfect, and overall material and finish appear to be high-quality. Installation, however... If you've never installed one of these before, you'll probably scour the Internet for TK videos, or even average users trying to help out. Most of those videos are extremely helpful, except for one issue: where does the Bolt Open Stop Spring go if it pops out during trigger installation? In theory, it shouldn't, but what if it does? Where does it go? Neither TK nor Ruger show exactly where it goes, nor the dozens of videos. By sheer luck, I was able to figure it out, and complete the installation. The rest of the process was simple and straightforward. Overall, satisfied with the purchase, and would recommend. Just have a good idea where all the parts go, in the event one of the springs makes a run for it.

This trigger is a welcome addition to my Ruger Mk IV. For pistols I prefer a straight trigger, and especially so on the Ruger, as on this gun, my trigger finger crosses the curved original trigger at an annoyingly uncomfortable angle from above. As for Tandemkross' Victory trigger, it's spot on, but in my opinion has some flaws: the fit between trigger and locking screws is not as tight as I would expect. The screws are too loose in there and require generous amounts of loctite (do use Loctite 222). Also I find the chequered grip surface too sharp for my taste. It gives me the feeling of only having a cut-off section of a long trigger profile. This, however, is also easily fixed by a couple of strokes with a file on the edges and a couple of strokes with sandpaper on the chequered surface, which gives the trigger better comfort and a stronger feeling of high quality without loosing the good finger grip intended. 30 seconds of finishing work make the difference between 5 and 4 stars. But I'm very satisfied with the end result.

Made a good improvement.

This trigger is a huge improvement over the factory curved trigger on the Mark IV Standard. It did reduce perceived pull weight. Tandemkross is a good company. When you call customer service you talk to a knowledgeable representative instead of getting and automated answering service.

the curved trigger dont feel good to me. this feels really good.

Received the Red Trigger in 4 days - installed it that day in less than an hour ! - followed the instructions and the video before receiving it, and everything went smooth - haven't had time to sight it in but everything seems to work just fine - the MKIV trigger from Ruger was a 4.5 lb pull, with the Victory trigger it went down to a 3.2 lb ! I recommend it !

can not say enough about the victory trigger. it changed my entire shooting for the better

I installed this in conjunction. With the "blast shield" magazine disconnect delete. Quite pleased with the difference in trigger pull. Definitely worth the investment. I really like that it is red, gives it a nice functional touch.

This is a very nice trigger. However, do not purchase this trigger without the entire kit. The ad says there has to be s little creep to reset the trigger. The creep will be the same as the Ruger horrible target trigger.