Install Instructions for Victory Trigger for Ruger® Mark III™, Mark III™ 22/45™, and Mark IV™ 22/45™
At a Glance:
- Textured and flat-faced for better control and feel
- 100% adjustable for pre- and over-travel
- Lightweight, skeletonized design
Supported Models:
- Ruger® Mark III™
- Ruger® Mark III™ 22/45™
- Ruger® Mark III™ 22/45™ LITE
- Ruger® Mark IV™ 22/45™
- Ruger® Mark IV™ 22/45™ LITE
- Ruger® Mark IV™ 22/45™ Tactical
The trigger of any firearm is critical and must give the shooter as much control as possible. The sleek, skeletonized, and lightweight design of the TANDEMKROSS Victory Trigger for Ruger® Mark III™ and 22/45™ provides a flat, textured face that many shooting pros prefer over a traditional curved trigger.
TANDEMKROSS’s unique design allows the shooter to pull straight back, making it easier for the shooter to tell if they are pulling too far left or right. The flat face also offers more real estate for the user to place their finger lower on the trigger. This increases their finger’s distance from the fulcrum, increasing leverage and decreasing the perceived trigger pull weight. While the actual pull weight technically never changes, having your finger further from the fulcrum or pivot still offers you a mechanical advantage.
Pairing this trigger with TANDEMKROSS’s Blast Pack (Thunder Hammer, Lightning Sear, and Blast Shield Magazine Disconnect) gets you an Ultimate Trigger Kit and is the best way to get you all the tactile and mechanical advantages of the Victory Trigger while also actually decreasing your pistol’s trigger pull weight. Please note, the Blast Pack and Ultimate Trigger Kit are only available for the Ruger® Mark IV™ and Ruger® Mark IV™ 22/45™ and is not compatible with the Ruger® Mark III™ or Mark III™ 22/45™.
All TANDEMKROSS Victory Triggers are textured for a no-slip grip in any condition, at any speed, even while wearing gloves!
The included pre-travel and post-travel screws allow for fine adjustment of trigger travel to create consistent, reliably clean trigger pulls. Amongst your included screws will be two different length pre-travel screws and two different length over-travel screws. You will want the longer pre- and over-travel screws if you are installing this trigger on a Mark IV™ 22/45™ and the shorter screws if installing in a Mark III™ or Mark III™ 22/45™.
The must-have TANDEMKROSS Victory Trigger for your Ruger® Mark III™ or 22/45™ pistol will bring any competition shooter one giant step closer to victory!
Need an extra hand to perform the install? Try the Magazine Vise Block for .22LR Platforms to keep your grip frame in place while performing this install or any routine maintenance!
Please note: This trigger does not work with any of the Standard Ruger® Mark IV™ pistols. Click here for a Victory Trigger for Ruger® Mark IV™.
This trigger is compatible with the Standard Ruger® Mark III™. However, due to the standard model’s smaller trigger guard, there is less space around the trigger which may be a concern for some users. Please be sure to watch our YouTube installation video above for more information. The trigger is shown in the video at timestamp 8:20.
Don’t forget, all TANDEMKROSS products are made in the USA and come with a LIFETIME guarantee!
WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
364 Reviews
-
Very nice product
Nice product, works very well. Would recommend to a friend.
-
Very impressed.
I bought one of these triggers with some skepticism. My 22/45 has the volquartsen accurizing kit including the Volquartsen adjustable trigger, and Mk II bushing. I had been happy with the VC trigger but I like the Kidd flat trigger blades on my 1022s so I decided to give it a try. I got it with the checkered face. I installed and adjusted it this morning without issue. I am really impressed by its fit and finish. 5391h86j9The pull measured near the bottom of the blade is an honest 1.5 pounds and I like the textured face. A very worthwhile addition to an already very accurate pistol. Thanks, Tandemkross, for a great product.
-
Very Nice!!!
Sometimes anything different you do to your equipment, you need to get familiar with it. This has a very different feel. The trigger is wider than anything I have in my safe but "wow" it works well. It is definitely an improvement from other adjustable trigger out there. I wonder why flat and wide triggers are not flooding the market. Anyhow, Tandemkross maybe pioneers with this one.
-
A Must Have!
Love this trigger!! It places the face of the trigger right in middle of my finger pad. If you keep your finger low on the trigger, you can defiantly feel the lighter trigger pull. I have the textured one, feels just right. Thanks TK! You have done it again!
-
Good Stuff
This is a great mod. Makes a good gun better. Installed and adjusted in about 20 minutes. Remember to put the blue thread lock on BEFORE you install it. I had to re-do mine because I didn't. I recommend taking the allen wrench with you to the range just in case you need to fine tune. Mine needed a teeny, tiny, bit of adjusting. Now it's good forever.
-
Got to GET IT
You might have thought you loved your gun before but after this, you can't stop playing with it.
-
Simply the best products!!
The first Tandemkross product I used in my 22/45 was their hammer bushing. Since then I just ordered and received very quickly I might add. The Challenger Charging Handle, Eagle Talon Extractor, and Fire Starter Firing Pin. The instructions were very clear and in color. These products are of the highest quality I have ever used. Only thing left to buy is the rail. Look's like I have to warm up the credit card again. To the team at Tandemkross! Keep the products coming!
-
Victory Trigger
Installed it in my (Volquartsen) 22/45 frame. Perfect fit and Super compared to anything out there. Installed and adjusted in about 15 minutes.
-
Victory Trigger an easy install
Spent 30 minutes this morning installing my textured Victory trigger and getting it adjusted, so easy I'm not sure it counts as a Mod at all. Wasn't sure about the textured model but now I love it. More good stuff from Tandemkross, keep up the good work guys and gals.
