Victory Trigger for Ruger® Mark IV™ 22/45™

Install Instructions for Victory Trigger for Ruger® Mark III™, Mark III™ 22/45™, and Mark IV™ 22/45™

At a Glance:

• Textured and flat-faced for better control and feel
• 100% adjustable for pre- and over-travel
• Lightweight, skeletonized design

The trigger of any firearm is critical and must give the shooter as much control as possible. The sleek, skeletonized, and lightweight design of the TANDEMKROSS Victory Trigger for Ruger® Mark IV™ and 22/45™ provides a flat, textured face that many shooting pros prefer over a traditional curved trigger. 

TANDEMKROSS’s unique design allows the shooter to pull straight back, making it easier for the shooter to tell if they are pulling too far left or right. The flat face also offers more real estate for the user to place their finger lower on the trigger. This increases their finger’s distance from the fulcrum, increasing leverage and decreasing the perceived trigger pull weight. While the actual pull weight technically never changes, having your finger further from the fulcrum or pivot still offers you a mechanical advantage. 

Pairing this trigger with TANDEMKROSS’s Blast Pack (Thunder Hammer, Lightning Sear, and Blast Shield Magazine Disconnect) gets you an Ultimate Trigger Kit and is the best way to get you all the tactile and mechanical advantages of the Victory Trigger while also actually decreasing your pistol’s trigger pull weight. 

All TANDEMKROSS Victory Triggers are textured for a no-slip grip in any condition, at any speed, even while wearing gloves!

The included pre-travel and post-travel screws allow for fine adjustment of trigger travel to create consistent, reliably clean trigger pulls. Amongst your included screws will be two different length pre-travel screws and two different length over-travel screws. You will want the longer pre- and over-travel screws if you are installing this trigger on a Mark IV™ 22/45™ and the shorter screws if installing in a Mark III™ or Mark III™ 22/45™.

The must-have TANDEMKROSS Victory Trigger for your Ruger® Mark IV™ or 22/45™ pistol will bring any competition shooter one giant step closer to victory!

Need an extra hand to perform the install? Try the Magazine Vise Block for .22LR Platforms to keep your grip frame in place while performing this install or any routine maintenance!

This trigger is compatible with the Standard Ruger® Mark III™. However, due to the standard model’s smaller trigger guard, there is less space around the trigger which may be a concern for some users. Please be sure to watch our YouTube installation video above for more information. The trigger is shown in the video at timestamp 8:20.

Supported Models:

• Ruger® Mark III™
• Ruger® Mark III™ 22/45™
• Ruger® Mark III™ 22/45™ LITE
• Ruger® Mark IV™ 22/45™
• Ruger® Mark IV™ 22/45™ LITE
• Ruger® Mark IV™ 22/45™ Tactical

COMPATIBILITY NOTE: This trigger does not work with any of the Standard Ruger® Mark IV™ pistols. Click here for a Victory Trigger for Ruger® Mark IV™.

This product is protected against mechanical failure for life by TANDEMKROSS’s Lifetime Guarantee. Learn more about our warranty and returns policies here.

⚠️ WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov