Victory Trigger for Browning® Buck Mark

Victory Trigger for Browning® Buck Mark

TANDEMKROSS

$49.99
(145 reviews) Write a Review
SKU:
TK12N0108BLK1
Weight:
0.30 Ounces
Adding to cart… The item has been added
 
 
At a glance:
  • Flat, textured faced for better control and feel
  • 100% adjustable for overtravel
  • Lightweight skeletonized design
 
The trigger of any firearm is critical and must give the shooter as much control as possible. The sleek, skeletonized, and lightweight design of the TANDEMKROSS Victory trigger provides a flat face that many shooting pros prefer as opposed to the traditional curved triggers commonly seen in the Browning Buck Mark market. This design allows the shooter to pull straight back - instantly providing the operator with the ability to tell if they are pulling too far to the left or the right.
 
The flat faced design also allows the operator to place their finger lower down on the trigger, increasing leverage and enabling them to take full advantage of lower trigger pull weights. The wide face distributes the weight of the trigger pull which also results in a perception of a lower pull weight. The textured trigger face provides a no slip surface regardless of speed, weather or shooting experience. This allows repeatable, near identical trigger pull movements. Coupled with the provided over-travel fine adjustment screws, this TANDEMKROSS exclusive trigger will bring any competitor a giant step closer to VICTORY!
 
Simplify firearm maintenance and installations with the Magazine Vise Block for .22LR Platforms!
 
*Fits all Buck Mark models including the Buck Mark Rifle
 
Don't forget, all TANDEMKROSS products are Made in the USA and come with a LIFETIME guarantee!
WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

145 Reviews

  • 5
    Steel Challenge shooter

    Posted by Herb on 14th Mar 2019

    Terrific! I was able to eliminate the reset distance to near zero.

  • 5
    Mr.

    Posted by Larry on 4th Mar 2019

    Easy to install and did reduce trigger pull.

  • 5
    NA

    Posted by Jeff on 20th Feb 2019

    I am very happy with the Victory trigger. It just makes shooting the Buckmark even more enjoyable. I couldn't really appreciate the flat faced trigger over the stock one until I tried it. It really helps aide in pressing the trigger straighter back rather than pulling it to one side. Installation was easy, however I did have to peen the end of the main trigger pin in order for it to stay in the trigger pin hole otherwise it would just slide right through with no resistance. Not a big deal since it would have stayed in place without peening it by virtue of the grip panels holding it in the frame. I just felt more comfortable with it being solidly in place like the stock trigger. Overall I am very happy with it.

  • 5
    Great trigger

    Posted by Troy on 14th Feb 2019

    I love the trigger

  • 5
    Victory Trigger

    Posted by Kurt on 2nd Jan 2019

    Received my TK Victory Triggerfor my Buckmark today. Installation was a snap. The trigger feels great. I can't wait to hit the range.

  • 5
    reel

    Posted by Ken on 6th Oct 2018

    Great product. Thank you.

  • 4
    Could Be Better

    Posted by William on 26th Sep 2018

    I installed the Victory Trigger in my 2017 Browning Buck Mark Contour. The trigger pull remained the same but it seemed smoother. I really liked it once I solved a couple of problems. First during the install the small green cap on the back of the trigger adjustment screw broke off. I contacted TM and they replaced it within a few days. After I installed the trigger and shot my pistol for the first time, I found the edges of the front of the trigger to be very sharp and felt very uncomfortable to me. I broke the edges with a very fine file and it felt much, much better to me. I recommend the trigger but in my opinion, it could be improved.

  • 5
    None

    Posted by Larry on 22nd Sep 2018

    Just installed this trigger-very easy to do. The trigger pull is unchanged as this as noting to do with the hammer or sear-but the felt trigger pull is less with the design. The stop works well and improves the feel of firing and resetting with no wasted motion. As other reviewers have noted the upper pin that engages the disconnect is loose. I have not had problem with this but I did clean the grip cut-out for this area well. T-K needs to add a sear/hammer combo that actually reduces the trigger pull that in conjunction with this trigger up-grade, would make the trigger pull crisp and light.

  • 5
    A necessary modification

    Posted by Bob Marino on 2nd Aug 2018

    This very simple mod makes a huge improvement in the trigger feel and action, I highly recommend it!

!