Victory Trigger for Browning® Buck Mark

Great product. Thank you.

I installed the Victory Trigger in my 2017 Browning Buck Mark Contour. The trigger pull remained the same but it seemed smoother. I really liked it once I solved a couple of problems. First during the install the small green cap on the back of the trigger adjustment screw broke off. I contacted TM and they replaced it within a few days. After I installed the trigger and shot my pistol for the first time, I found the edges of the front of the trigger to be very sharp and felt very uncomfortable to me. I broke the edges with a very fine file and it felt much, much better to me. I recommend the trigger but in my opinion, it could be improved.

Just installed this trigger-very easy to do. The trigger pull is unchanged as this as noting to do with the hammer or sear-but the felt trigger pull is less with the design. The stop works well and improves the feel of firing and resetting with no wasted motion. As other reviewers have noted the upper pin that engages the disconnect is loose. I have not had problem with this but I did clean the grip cut-out for this area well. T-K needs to add a sear/hammer combo that actually reduces the trigger pull that in conjunction with this trigger up-grade, would make the trigger pull crisp and light.

This very simple mod makes a huge improvement in the trigger feel and action, I highly recommend it!

I’ve now put about 2,000 rounds through my Browning Buckmark with the Tandemkross Victory trigger installed. This is a great upgrade to the plinker. Although the pull weight did not change, it feels much lighter, certainly a smoother action. First rate quality manufacturing, coupled with excellent communication and follow up. I would highly recommend the Victory trigger.

Love the feel of this trigger over the stock trigger. I enjoy shooting my Buckmark much more now. Had a small issue and customer service at Tandemkross went above and beyond my expectations. Great company,highly recommended.

It looks good and feels even better. Strongly recommend if you shoot more than a couple of rounds a year to get one. Very nice.

Installed just as the video instructed and did improve my target shooting. Great quality product!

Installed in my brother in law's Buckmark. The reach is too much for me, but has large hands so it should fit him well. Like most others, the pins were loose as a goose, though the grips will keep them in place. Trigger had a good feel, though also felt tight. Could probably use a little fitting. I installed it the night before a steel match and had little testing beforehand. He had a reset issue on the first stage, but I just had the overtravel too far in. Quick turn of an allen wrench and that was fixed. No issues the rest of the day. Trigger pull was basically the same as before as far as pull weight. The flat face did seem like I would be faster with it myself though. Those that said they dropped pull weight by 2lbs, um.. not sure about that. Maybe if your before test had the gauge up high on the trigger and your after had it down on the tip. Like leverage on a pry bar, you obviously will require less force the further away from the fulcrum point. I may do some more fitting with unless it just breaks itself in on its own, but I'd call it a win. 4 stars for the sloppy pins. Agreed, this is just a matter of drilling the correct size holes in it. Even the little trigger bar pin that is exclusive to the Victory and not a factory re-used part just falls in and out. That part was bad. Actually, I'm dropping to 3 stars. This trigger has been out for a while and that hasn't been fixed.