Victory Trigger for Browning® Buck Mark

Victory Trigger for Browning® Buck Mark

TANDEMKROSS

$49.99
(158 reviews) Write a Review
SKU:
TK12N0108BLK1
Weight:
0.30 Ounces
Adding to cart… The item has been added

At a glance:

  • Flat, textured faced for better control and feel
  • 100% adjustable for overtravel
  • Lightweight skeletonized design
The trigger of any firearm is critical and must give the shooter as much control as possible. The sleek, skeletonized, and lightweight design of the TANDEMKROSS Victory trigger provides a flat face that many shooting pros prefer as opposed to the traditional curved triggers commonly seen in the Browning® Buck Mark market. This design allows the shooter to pull straight back - instantly providing the operator with the ability to tell if they are pulling too far to the left or the right.
 
The flat faced design also allows the operator to place their finger lower down on the trigger, increasing leverage and enabling them to take full advantage of lower trigger pull weights. The wide face distributes the weight of the trigger pull which also results in a perception of a lower pull weight. The textured trigger face provides a no slip surface regardless of speed, weather or shooting experience. This allows repeatable, near identical trigger pull movements. Coupled with the provided over-travel fine adjustment screws, this TANDEMKROSS exclusive trigger will bring any competitor a giant step closer to VICTORY!
 
Simplify firearm maintenance and installations with the Magazine Vise Block for .22LR Platforms!
 
This product is protected against mechanical failure for life by TANDEMKROSS’s Lifetime Guarantee. Learn more about our warranty and returns policies here.
⚠️ WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

158 Reviews

  • 2
    Mr

    Posted by Scott on 14th Apr 2019

    This IS NOT a "drop in" replacement. The shoulder pin provided is too long for a Buckmark URX,you must use the one that came with your pistol. tech support will tell you that you "need to remove some material" from the trigger for it to work. That means filing off metal in the right spots.

  • 5
    Mr.

    Posted by Terry Ralph on 31st Mar 2019

    I rated the trigger as a four star because the trigger works great and I recommend it to all, if they want to improve their shooting with the Buck Mark! It would of got a five star had I been informed of the spring kit also available. It took me another 3-5 days to receive it. I had a qualified gunsmith do my work. After working the sear down and adding the spring kit and trigger my results were excellent! Five and a half lb trigger with creep down to: two lb trigger with very little creep. I'm a happy camper!

  • 4
    Mr.

    Posted by Don Renfro on 26th Mar 2019

    This item seemed to work fairly well on a 2004 Browning Buck Mark Camper. Fairly easy to install and adjust. An improvement over the original trigger but not by as much as I was hoping for in an expensive add on trigger.

  • 4
    retired

    Posted by Frank on 22nd Mar 2019

    The upper pin for the trigger did not install as easy as I thought it would. I did finally get the pin set correctly and the pistol shoots well.

  • 5
    Steel Challenge shooter

    Posted by Herb on 14th Mar 2019

    Terrific! I was able to eliminate the reset distance to near zero.

  • 5
    Mr.

    Posted by Larry on 4th Mar 2019

    Easy to install and did reduce trigger pull.

  • 5
    NA

    Posted by Jeff on 20th Feb 2019

    I am very happy with the Victory trigger. It just makes shooting the Buckmark even more enjoyable. I couldn't really appreciate the flat faced trigger over the stock one until I tried it. It really helps aide in pressing the trigger straighter back rather than pulling it to one side. Installation was easy, however I did have to peen the end of the main trigger pin in order for it to stay in the trigger pin hole otherwise it would just slide right through with no resistance. Not a big deal since it would have stayed in place without peening it by virtue of the grip panels holding it in the frame. I just felt more comfortable with it being solidly in place like the stock trigger. Overall I am very happy with it.

  • 5
    Great trigger

    Posted by Troy on 14th Feb 2019

    I love the trigger

  • 5
    Victory Trigger

    Posted by Kurt on 2nd Jan 2019

    Received my TK Victory Triggerfor my Buckmark today. Installation was a snap. The trigger feels great. I can't wait to hit the range.

!