Don't forget, all TANDEMKROSS MKIII™ series bushings come with a LIFETIME guarantee!
Steel Hammer Bushing for Mark III and 22/45 Pistols
- Magazines will slip right out
- Easier takedown and cleaning
- Can reduce failure to feeds
- Comes with colored installation instructions
This high quality 304 stainless steel bushing is made for high duty cycle shooting and replaces the Ruger® factory bushing allowing you to safely remove the magazine disconnect from the firearm. There are instructions on the internet showing the use of washers and other parts, but this is unreliable and unsafe! Use an actual part that is designed for the job. This bushing lets the hammer move properly and at the correct speed. You will be pleased with the fit and final result with this bushing. If you know how to clean this gun you can easily remove the disconnect. Removing the disconnect allows the magazines to fall free, allows them to seat properly and does allow the gun to fire with the magazine out for tactical competition and self-defense scenarios. Check to see if your state requires the magazine disconnect installed if the firearm is ever resold.
Supported Model List:MKIII™ -ALL MODELS!
- MKIII™ 22/45™
- MKIII™ 22/45™ Competition
- MKIII™ 22/45™ Government Target
- MKIII™ 22/45™ Target
- MKIII™ Competition
- MKIII™ Government Target
- MKIII™ Target
- MKIII™ LITE
- MKIII™ Hunter
*** ATTN: FAQ: Will this bushing work in my Volquartsen Hammer? YES. The bushing and VQ hammer will work together. However, it can be a tight fit to get them together. Please let us know if you are experiencing trouble and we will get you a bushing that will fit into the tighter VQ hammer.
Ruger® and its associated model names are registered trademarks of the Ruger® Corporation.
657 Reviews
-
Mr.
There is nothing to say... Part is perfect fit, makes gun more comfortable, plus delivery was very fast. Thanks!
-
If you only do one upgrade, do this
I was terrified of doing this mod. Took me forever to figure out how to get the gun back together, but once I figured out how to put the sear back in, it was easy. Best mod out there if you have a newer model. And the price can't be beat! Folks at Tandemkross and on Tak Driver forum were all very helpful and there are some amazing resources on line. Once you figure out reassembly, it really simplifies the whole process. Mags drop free and takedown is a snap. Well worth the learning curve.
-
Highly recomended
A must have part. Makes stripping so much easier.
-
Jimbo
Not that hard to install with help from YouTube. Great part that makes this pistol awesome to shoot. Mags drop free, you can dry fire, and the pistol functions as it should have from the factory. Add some extended floor plates for your mags to help seat them reliably and this pistol is now worth plinking with. It was aggravating before (factory). Thanks thanks thanks.
-
Captain
The hardest part of installing this Magazine Disconnect Bushing was getting the upper off of the Ruger 22/45! Watch the video here a few times, take your time and SLOWLY push the pin they talk about out from right to left, making sure you don't push it out all the way (I didn't). And you got it made. If you're worried you can't do it - don't. I am the number 2 (got to be somebody worse out there than me) mechanical person in the U.S.A. Excellent product, Ruger should use Tandemkross products.
-
Easy in, big improvement.
Thank goodness for u-tube! Install was easy, simplifies operation of the 22-45. Best value on the market.
-
retired
Thankfully there are people out there that correct others shortcomings. This is the way the gun should have been made from the begining.
-
SUPER
This product works as advertised and was an easy install. Mags drop with no restriction and reloading is a snap, no more fumbling to remove a mag.
-
Well worth your time and Money
Easy to install, works great. Enough Said.
