Don't forget, all TANDEMKROSS MKIII™ series bushings come with a LIFETIME guarantee!
Steel Hammer Bushing for Mark III and 22/45 Pistols
- Magazines will slip right out
- Easier takedown and cleaning
- Can reduce failure to feeds
- Comes with colored installation instructions
This high quality 304 stainless steel bushing is made for high duty cycle shooting and replaces the Ruger® factory bushing allowing you to safely remove the magazine disconnect from the firearm. There are instructions on the internet showing the use of washers and other parts, but this is unreliable and unsafe! Use an actual part that is designed for the job. This bushing lets the hammer move properly and at the correct speed. You will be pleased with the fit and final result with this bushing. If you know how to clean this gun you can easily remove the disconnect. Removing the disconnect allows the magazines to fall free, allows them to seat properly and does allow the gun to fire with the magazine out for tactical competition and self-defense scenarios. Check to see if your state requires the magazine disconnect installed if the firearm is ever resold.
Supported Model List:MKIII™ -ALL MODELS!
- MKIII™ 22/45™
- MKIII™ 22/45™ Competition
- MKIII™ 22/45™ Government Target
- MKIII™ 22/45™ Target
- MKIII™ Competition
- MKIII™ Government Target
- MKIII™ Target
- MKIII™ LITE
- MKIII™ Hunter
*** ATTN: FAQ: Will this bushing work in my Volquartsen Hammer? YES. The bushing and VQ hammer will work together. However, it can be a tight fit to get them together. Please let us know if you are experiencing trouble and we will get you a bushing that will fit into the tighter VQ hammer.
Ruger® and its associated model names are registered trademarks of the Ruger® Corporation.
655 Reviews
-
Get it!
This is one cool upgrade as the mag just falls right out now. Also, it is very easy to install.
-
AMAZING
BUY IT FOR YOUR GUNS PEOPLE!!!
-
MNST
Bushing works as designed, magazine release is much smoother than previously and disassembly/assembly is also simplified by installation of this product.
-
Patriot
Turn your MK III into a MK II for Ten Bucks. This is the easiest way to get past the annoying features of the MK III and have a Ruger that disassembles like a MKII with a magazine release thats easy to operate. Win Win.
-
Hammer Bushing
I received the hammer bushing within a few days of placing the order. Installation was extremely easy thanks to the video. The bushing works as advertised. Magazines actually eject now, & disassembly & reassembly is easier & in my opinion, safer.
-
Works as advertised
I really like the way the magazines release from the pistol now. Previously I had to practically pry them out. Also makes assembling the firearm a little easier, so I won't have to sell my Mark III and buy a Mark IV. I'm not particularly mechanically inclined, so it did take me a little longer than some other folks to install the bushing. Probably because I was being very careful. Between the written instructions and the video available, I think most people should be able to do this themselves.
-
gun nut
this improved the MK iii magazine release , much easier to remove them now. what a great improvement.
-
Great Aproduct
I bought the bushing to use in my Mk III 22/45 that has a Volquartsen trigger kit installed. The bushing works great, only drawback is it will not fit in the Volquartsen hammer. So, I put the stock hammer back in and it works fine.
-
Good product, would recommend
This is a reasonably-priced, quality product that provides notable improvements to "ease of use" on a firearm platform that's become known for being a bit finnicky and a hassle to maintain. Installation was easy, that pesky magazine "safety" is no more, and the magazines drop out much more smoothly than before. I actually purchased this part for my father's gun, but will definitely purchase another for myself if I ever buy a 22/45.
