Don't forget, all TANDEMKROSS MKIII™ series bushings come with a LIFETIME guarantee!
Steel Hammer Bushing for Mark III and 22/45 Pistols
- Magazines will slip right out
- Easier takedown and cleaning
- Can reduce failure to feeds
- Comes with colored installation instructions
This high quality 304 stainless steel bushing is made for high duty cycle shooting and replaces the Ruger® factory bushing allowing you to safely remove the magazine disconnect from the firearm. There are instructions on the internet showing the use of washers and other parts, but this is unreliable and unsafe! Use an actual part that is designed for the job. This bushing lets the hammer move properly and at the correct speed. You will be pleased with the fit and final result with this bushing. If you know how to clean this gun you can easily remove the disconnect. Removing the disconnect allows the magazines to fall free, allows them to seat properly and does allow the gun to fire with the magazine out for tactical competition and self-defense scenarios. Check to see if your state requires the magazine disconnect installed if the firearm is ever resold.
Supported Model List:MKIII™ -ALL MODELS!
- MKIII™ 22/45™
- MKIII™ 22/45™ Competition
- MKIII™ 22/45™ Government Target
- MKIII™ 22/45™ Target
- MKIII™ Competition
- MKIII™ Government Target
- MKIII™ Target
- MKIII™ LITE
- MKIII™ Hunter
*** ATTN: FAQ: Will this bushing work in my Volquartsen Hammer? YES. The bushing and VQ hammer will work together. However, it can be a tight fit to get them together. Please let us know if you are experiencing trouble and we will get you a bushing that will fit into the tighter VQ hammer.
Ruger® and its associated model names are registered trademarks of the Ruger® Corporation.
653 Reviews
-
Mr.
Makes the pistol much faster and easier to reload (sometimes important in target matches). Well worth the small expense.
-
none
I installed this bushing along with a few other upgrades. It is so much nicer working on the pistol now. I don't have to mess with the mag any longer when field stripping the pistol for cleaning or for reassembly. Helped with trigger feel also. I highly recommend.
-
Steel Hammer Bushing for 22/45
Works as advertised. This is the second bushing I have installed and they work great. Buy with confidence.
-
None
I purchased four upgrades for my 22/45. 1 - Steel Hammer Bushing. TK04N0002SSL1 2 - "Victory" Trigger TK04N0085BLK1T 3 - LCI Replacement Insert TK04N0003BLK1 4 - Hogue Mark wrap around grip 1502N0081BLK1 All work as advertised and were easy to install, total time about 30 minutes. The bushing made the biggest difference and should be purchased first. The trigger makes a big difference and should be the second modification. You should probably get both of these mods. The insert and grip are a nice to have but get the bushing and trigger first.
-
Must have!
Absolutely the best upgrade you can do to a Mark III! Easy to install and well worth the money.
-
Mr.
Installed this product along with a Volquartsen target sear & Volquartsen adjustable trigger and immediately transformed my absolutely HORRID factory Ruger 22/45 trigger pull to light & glass-smooth.
-
Ruger MKIII (standard) upgrades
This bushing effectively removes the interlock between the magazine and trigger, making cleaning and disassembly simpler since you don't have to repeatedly take an empty magazine in and out. I was having occasional problems with failure to feeds, failure to ejects, and light strikes out of my Ruger MKIII. So I did a little research and decided to take a chance on fixing it myself. I installed the following components: Volquartsen Firearms Targe Sear Part Number:3304N0151SSL1 "Eagle's Talon" Extractor Part Number:1705N0012SSL1 Steel Hammer Bushing Part Number:TK04N0002SSL1 "Fire Starter" Titanium Firing Pin Part Number:TK05N0011SSL1 LCI Replacement Insert - Black Part Number:TK04N0003BLK1 The steel hammer bushing was to get rid of the trigger-magazine interlock. Installation was simple, except for the sear. I have big fingers and parkinson's and could the sear is really slick. I had to use a pair of tweezers to hold the sear and the video is sort of iffy on the spring install. Everything else, just follow the videos. Measurements on trigger put dropped from 4 pounds 1 oz. to 1 pound 9 oz. In 250+ rounds fired after the parts replacement, there wasn't a single failure to feed or failure to eject. I did have two misfires. I believe these to be complete duds instead of misfires. I cycled the bullets through again and they still did not fire. And to be fair, the ammo was more than 20 years old. In any case, I consider this to be a successful remediation of problems with my MKIII and it is now much more reliable and less frustrating to shoot. There were no failures of any kind with ammo that purchased within the last decade.
-
Get it!
This is one cool upgrade as the mag just falls right out now. Also, it is very easy to install.
-
AMAZING
BUY IT FOR YOUR GUNS PEOPLE!!!
