Don't forget, all TANDEMKROSS MKIII™ series bushings come with a LIFETIME guarantee!
Steel Hammer Bushing for Mark III and 22/45 Pistols
- Magazines will slip right out
- Easier takedown and cleaning
- Can reduce failure to feeds
- Comes with colored installation instructions
This high quality 304 stainless steel bushing is made for high duty cycle shooting and replaces the Ruger® factory bushing allowing you to safely remove the magazine disconnect from the firearm. There are instructions on the internet showing the use of washers and other parts, but this is unreliable and unsafe! Use an actual part that is designed for the job. This bushing lets the hammer move properly and at the correct speed. You will be pleased with the fit and final result with this bushing. If you know how to clean this gun you can easily remove the disconnect. Removing the disconnect allows the magazines to fall free, allows them to seat properly and does allow the gun to fire with the magazine out for tactical competition and self-defense scenarios. Check to see if your state requires the magazine disconnect installed if the firearm is ever resold.
Supported Model List:MKIII™ -ALL MODELS!
- MKIII™ 22/45™
- MKIII™ 22/45™ Competition
- MKIII™ 22/45™ Government Target
- MKIII™ 22/45™ Target
- MKIII™ Competition
- MKIII™ Government Target
- MKIII™ Target
- MKIII™ LITE
- MKIII™ Hunter
*** ATTN: FAQ: Will this bushing work in my Volquartsen Hammer? YES. The bushing and VQ hammer will work together. However, it can be a tight fit to get them together. Please let us know if you are experiencing trouble and we will get you a bushing that will fit into the tighter VQ hammer.
Ruger® and its associated model names are registered trademarks of the Ruger® Corporation.
651 Reviews
-
Magazine disconnect bushing
Purchased the Tandemkross magazine disconnect bushing as recommended by SRT Arms for my integrally suppressed Mark III. Piece fits and functions exactly as described, cured an intermittent failure feed and now allows for repeated cycling of action with dry fire. The installation video allowed me to install myself in two-beers time!
-
Sling Shot and Bushing.
After installing the Sling Shot and Bushing, which was fairly easy to install. It was totally a different pistol. I couldn't believe the difference it made. It is a different pistol and a better one. Couldn't be happier.
-
Bushing
Works as advertised, dropped right in without issue.
-
Bushing
This certainly makes use and cleaning much easier. Thanks!
-
MK III Hammer Bushing
Bushing was well made and a perfect fit for my MK III 22/45. Be sure to head the warning about the sear as mine rotated out of place and took some extra time to re-assemble.
-
22/45 Bushing
This bushing is awesome. The video to install it was easy. Cant beat it for the price and have a better & smoother functioning pistol. Thanks Tandemcross!
-
Steel hammer bushing
Watch the installation video and goes in real smooth. Works great mag drops free Good stuff as usual from Tandemkross. Thanks.
-
Trigger pull a little gritty at first
After about 40 rounds and 100 dry fires, whatever was dragging seems to have smoothed out/broken in on my RUGER M3 22/45 (all Tandemkross guts at this point). Back to the range on Sunday to confirm.
-
Ruger Mark III hammer bushing
It works as advertised. The speed of my magazine changes has more than doubled. The installation video was good. The lighting on the inside of the pistol could have been better and the explanation of how to finish the installation should have been more detailed.
