At A Glance:
- Shot-peened spring offers longer life than factory spring
- Increased output force- reduces failure-to-feed issues
- Replaces old, broken mag springs
Supported Models:
- Smith & Wesson® SW22 Victory®
- Performance Center® SW22 Victory®
⚠️ WARNING: This product can expose you to chemicals including Michler's Ketone, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.40 Reviews
-
SW22 Magazine Springs
These springs are longer and stiffer than the OEM springs, and for that reason, I had hoped they would cure the occasional misfeed, but I see no difference. And, their stiffness makes the magazine a little more difficult to load.
-
Victory magazine springs
Huge improvement over the stock springs. No more FTL with these.
-
Works great
The original springs in my magazines were compressed and causing failures to feed. Ran 200 rounds through 5 magazines with no FTF. Perfect for Steel Challenge.
-
Mag springs
Helps a lot, but doesn't fully cure the Victory's slow mag syndrome.
-
victory magazine springs
work fine. these springs are very strong. you should use a loader, otherwise your finger might not be strong enough to handle the last few rounds to be loaded in the magazine.
-
Green Springs
They are much stronger than stock and longer. They installed easy ever with extended.
-
FTF Fixed!
I was having failure to feed(FTF)issues with my Victory 22. The round would have some lead shaved off the nose, and occasionally a bent casing. The "Green Springs" fixed the issue. No more FTF
-
Green Spring
These work quite well in my Victory magazines. One thing though. If you bought the red follower to load 11 rounds, it won't work worth these springs; 10 rounds only. Still 5 stars though.
-
Excellent!
I started getting occasional FTF’s & narrowed it down to weak magazine springs. Once I changed out the factory springs to these green springs the problem disappeared.
