GearBox Installation Instructions for the Browning Buck Mark
At a glance:
- Upgraded sear spring lowers trigger pull weight by .5lbs or more!*
- Installation frame houses spring for easy installation and consistent sear engagement
- No need to experiment with DIY spring fixes - one simple drop-in replacement!
The Browning Buck Mark has a great trigger right out of the box. But if you’re like many Browning Buck Mark owners, you’ve likely researched ways to lower the gun’s trigger pull weight and adjust the feel even further.
There are many DIY solutions out there, including the well-known “Heggis Flip” or Buck Mark sear spring flip. But these solutions can be complicated to perform, provide inconsistent results and can cause potentially dangerous issues with the fire control system.
Put an end to DIY fixes with the new GearBox for Browning Buck Mark from TANDEMKROSS! The GearBox is a simple, drop-in replacement for the factory Buck Mark sear spring that makes installation easier and lightens the trigger pull weight.
The GearBox comes complete with a redesigned torsion spring housed in a polymer installation frame. The frame captures the spring for easy installation and then, once installed, works as a guide for the spring, ensuring proper alignment and consistent engagement with the sear.
Simplify your trigger upgrades and install the TANDEMKROSS GearBox today. Pair with a Browning Buck Mark “Victory” Trigger for ultimate performance!
*Individual trigger pull weight results may vary.
*Fits all Buck Mark models including the Buck Mark Rifle
159 Reviews
-
owner
Easy to install and works very well so far. This is just what I needed to put the old Buckmark back yo shooting well
-
Steel Challenge shooter
Reduced trigger pull from 64 oz to 47 oz. Easy to install!
-
Smooth
I never had a problem installing the original spring but, this is even easier to install. I do believe that this upgrade made for a more consistent and smoother pull..
-
USA SFC (Ret)
Installed the "Gear Box" in my wife's Browning Buckmark over top of the Tandemkross "Ultimate" trigger. Installation was VERY easy(3 minutes)and simple. Trigger pull is now sub-three pounds and very crisp. Another good & affordable product from Tandemkross!
-
shooter
I bought 2 of these. One I put in my BuckMark that has been tricked out including one of your triggers. It lightened the pull another lb. or so and made it a little crisper. The other went into a stock BuckMark. It lowered pull by a little more then 2 lbs, VERY easy to install. Great purchase>
-
Mr.
Easy to install and did reduce trigger pull.
-
As advertised
The ad says it all. The gearbox is easy to install and drops the trigger pull by approximately 1 pound. I have tried the reverse sear spring mod and experienced the resulting trigger problems. Had to reinstall the sear spring which was a very difficult process. The gearbox takes all the difficulty out of changing that spring. A great product. Highly recommend it for the Buckmark.
-
None
Easy too install. Works great
-
Tandemkross Gearbox
Leave it to the guys at Tandemkross to come up with the most creative ideas and technology to make your plinker better. Although the trigger pull weight on my Browning Buckmark after 15,000+ rounds was already at an acceptable, the Gearbox dropped it even further to competition level ease. This is really a great little addition to my BB!!
