Game Changer Compensator for .22LR

TANDEMKROSS

$34.99
(479 reviews) Write a Review
SKU:
TK00N0005
Weight:
0.30 Ounces
Adding to cart… The item has been added

At a glance:

  • Dramatically reduces muzzle rise and improves accuracy
  • Large openings for easy cleanings
  • Fits on standard ½"x28 threaded barrels

When shooting for accuracy every advantage is critical for that precise shot. The high quality and specially engineered TANDEMKROSS muzzle brake was designed specifically with the 22 LR cartridge in mind. Unlike other models that have vent holes all over, the Game Changer Compensator has directed vent ports on the top and the side giving the right amount offset for the .22LR cartridge.

Made out of high strength T6061 aluminum, this brake features strategically placed vents that dramatically reduce recoil that can ruin that once in a lifetime shot. Increase your accuracy and get the TANDEMKROSS Game Changer Compensator today!

The product includes a flat washer in addition to an o-ring. For firearm models that utilize a thread adapter (ie: TX22, P22, SR22) or models with a thin-profile barrel, TANDEMKROSS recommends installing the flat washer, o-ring, and then compensator in that order. For fixed-barrel firearms with a barrel diameter greater than .800", the flat washer is typically not needed.

Product Specifications:

  • Threading: Standard ½"x28 TPI 
  • Outside diameter: 1" 
  • Length: 1.75"
  • Weight: 1.23oz

 Supported Devices:

  • Ruger® Mark III™
  • Ruger® Mark III™ 22/45™
  • Ruger® Mark III™ 22/45™ LITE
  • Ruger® Mark IV™ Target Sports South Distributor Exclusive
  • Ruger® Mark IV™ Tactical
  • Ruger® Mark IV™ 22/45™ Tactical
  • Ruger® Mark IV™ 22/45™ LITE
  • Ruger® SR22
  • Ruger® 10/22®
  • Ruger® 22 Charger pistol
  • Ruger® Precision Rimfire
  • Savage Arms Mark II TRR-SR
  • Walther® P22® (may require thread adaptor)
  • Smith & Wesson® SW22 Victory®
  • Smith & Wesson® M&P®22 Compact
  • Smith & Wesson® M&P®15-22P pistol
  • Smith & Wesson® M&P®15-22 rifle
  • TaurusTX™ 22
  • KelTec CP33
  • KelTec CMR30
  • GSG/SIG 1911-22 (requires thread adaptor)
  • Other firearm models chambered in .22LR with US standard 1/2x28" muzzle threading

PLEASE NOTE: This product is only for .22LR only

This product is protected against mechanical failure for life by TANDEMKROSS’s Lifetime Guarantee. Learn more about our warranty and returns policies here.

⚠️ WARNING: This product can expose you to chemicals including chromium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.

479 Reviews

  • 5
    Game Changer

    Posted by Inez Brew on 11th Sep 2019

    This is a great addition for my 10/22.

  • 5
    SW Victory compensator

    Posted by chuck on 5th Sep 2019

    Perfectly machined & finished, super easy to install. Besides looking really nice I noticed less of front barel rise but can’t confirm it with any official measurements. Would be nice if it was a bit heavier. The Game Changer Pro is made of SS but didn’t want to pay much highrt price.

  • 3
    Cmr30

    Posted by George on 4th Sep 2019

    Break threads well but stops short of the barrel. Looks funny but shoots well

  • 5
    Game Changer Compensator

    Posted by Paul Westcott on 25th Aug 2019

    I installed the compensator on my Ruger Mk iv 22/45 Lite. It was easy to install and noticeably helped getting the pistol back on target during Precision Shooting (Bullseye)practice. Added a few need points to my scores.

  • 5
    Compensator for Ruger® MKIII 22/45, MKIV 22/45

    Posted by Bob on 22nd Aug 2019

    The 'Game Changer' for my Ruger Mark IV Lite is outstanding. I had to sand it down a bit and use a thinner O-Ring but that was it. I applied a little bit of Loctite and screwed it on. The whole process took about 15 minutes and it looks great on the pistol. If I could change anything about it, I would make the finish 'matte' to match the barrel. That's a minor detail though. Thanks, Tandemkross!

  • 5
    compensator

    Posted by Andrew Koehn on 31st Jul 2019

    This works pretty good. O ring makes it easy to install without tools. Can't tell a lot since its only a .22 but does seem to help keep the front end down to better require the target quicker

  • 4
    sw22 Victory

    Posted by Steven on 16th Jul 2019

    its a little larger in diameter than the barrel

  • 5
    Nice add on

    Posted by Lloyd Crothers on 16th Jul 2019

    Fits my P22 perfect, adds very little weight to the front of the pistol and looks like it was part of the pistol when bought, I like it

  • 5
    The Game Has Changed

    Posted by Doug on 13th Jul 2019

    Amazing compensator from TK! Looks beautimous on the Ruger SR22. Balance is maintained because it's so incredibly light! A must have when you're not rocking a can.