Fire Starter Titanium Firing Pin for Ruger Mark Series
At a Glance:
- Titanium is 40% lighter than steel
- Helps reduce lock time for higher accuracy
- Non-corrosive and highly durable
The TANDEMKROSS Fire Starter Titanium Firing Pin for Ruger® Mark™ Series is a drop in replacement for the factory firing pin. A titanium firing pin is lighter and moves faster than a heavier steel pin. This reduces lock time and allows the gun to fire faster. The lighter titanium pin is resistant to mushrooming and will provide repeatability with positive primer strikes. With less deformation of the casing due to the lighter weight of the firing pin it can also lead to better extraction. The stability of titanium over steel makes it an ideal choice of material when operating in extreme heat or cold conditions.
Supported Firearms:
- Ruger® Mark I™
- Ruger® Mark II™
- Ruger® Mark II™ 22/45™
- Ruger® Mark III™
- Ruger® Mark III™ 22/45™
- Ruger® Mark III™ 22/45™ LITE
- Ruger® Mark IV™ Target
- Ruger® Mark IV™ Hunter
- Ruger® Mark IV™ Competition
- Ruger® Mark IV™ Tactical
- Ruger® Mark IV™ 22/45™
- Ruger® Mark IV™ 22/45™ Tactical
- Ruger® Mark IV™ 22/45™ LITE
TANDEMKROSS firing pins, extractors, and springs are protected against mechanical failure for two years after the time of purchase. Learn more about our warranty and return policies here.
101 Reviews
-
Fire Starter
Incredible replacement for the 22/45. You do not even need a scale to know that this is lighter than the original. Installation is a breeze and it functions great!
-
Upgrade that 22/45
I now have zero failure to fires and failure to feed with 150 rounds of mixed ammo after noted upgrades. I would do it again and should have done this sooner. Items from Tandemkross: - LCI Replacement Insert - Titanium Firing Pin - Hammer Bushing for Mag Disconnect - PRO Magazine Bumper Other Company - adjustable trigger (only the trigger, no other parts) Hope Tandemkross make one of these soon.
-
Great product
this pin is much lighter than the stock pin. Installation was very easy. Works great, 1500 rounds fired, no miss-fires
-
Mr
Great quality and easy installation .tandemkross strikes again
-
100% Reliable
I have the Fire Starter Titanium firing pin and Eagles Talon extractor in my Ruger 22/45 lite and have not had one misfire or any trouble at all since installing these products. I compete at my local gun club and I have to rely on my gun and so far it has not let me down.
-
Mr.
Easy to install. It has been working very well
-
Lovin these parts...
Are you kidding me, used to like my 22/45, Now I love it. did both firing pin and extractor together with my 7yr. old watching it was very fun.
-
Easy to install
I ordered the Fire Starter Titanium Firing Pin and the Eagle’s Talon Extractor combo in addition to the Gunsmither Pistol Pal. Installation of the firing pin was very straight forward and easily installed. Installing the Eagle’s Talon Extractor was a little more challenging but using the pistol pal tempered steel pin attached to the cap made it again easy to install. If you haven’t done so, I recommend you order all three items with the pistol pal making a great edition to your tool box.
-
Easy Cure for most FTFs
My early model Ruger 22/45 was having an occasional "failure to fire" when shooting in the Rimfire Challenge". I initially blamed the misfires on the ammo that you get these days, but then I found the TandemKross Fire Starter firing pin, and decided to give it a try. It was easy to install, and I estimate that it reduced my FTFs by over 90%. This is a must-have if you shoot in competition.
