Ruger® PC Carbine™ "Eagle's Talon" Extractor Install Instructions
At a Glance:
- Machined using high grade tool steel
- Designed for optimal impact and wear resistance
- Easily replaces factory part without any permanent modifications
The TANDEMKROSS Eagle’s Talon Extractor for Ruger® PC Carbine™ and PC Charger™ is a must-have upgrade. The Eagle’s Talon is made of hardened tool steel for longevity. TANDEMKROSS’s precise manufacturing process and careful attention to detail ensure the extractor reliably and consistently grabs the empty cartridge to prevent failures to extract.
Whether in the heat of serious competition or while plinking for fun, malfunctions can easily ruin your day. Keep that from happening to you by making your good gun great with the Eagle’s Talon Extractor for Ruger® PC Carbine™ and PC Charger™ today!
TANDEMKROSS firing pins, extractors, and springs are protected against mechanical failure for two years after the time of purchase. Learn more about our warranty and return policies here.
⚠️ WARNING: This product can expose you to chemicals including cadmium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov
26 Reviews
-
Eagle Talon Extractor for Ruger PC9
I was having regular ejection issues with my Ruger PC9. Replaced the Ruger extractor with the Eagle Talon and have not had an issue since. Great high quality product.
-
Eagle's Talon Extractor for Ruger® PC Carbine™
A must have if you want top reliability from your PC Charger. Definitely I can feel the difference in this field - tested it just today.
-
Ruger PC must have
OK, the bad news first. Why the 4-stars? Because it was out of stock like FOREVER! As my OEM extractor was a Jam-o-Matic, I had to buy from a [TK] competitor. It worked flawlessly until, just like [TK] competitors for the 10/22 extractors, the hook broke off, resulting in FTEs. I actually wore out a [TK] 10/22 extractor and it never broke. SO as [TK] was still OUT OF STOCK, I had to modify an OEM to look a lot like [TK]'s, until [TK] finally got them back in stock. Admittedly I like the profile of [TK]'s competitor better, as it matched the profile of the rim on a casing. Turns out that may not have been such a good design, as the hook sheared off at the sharp corner at the inside base of the hook. Looking at the [TK] profile with that large radii, hoping it is less likely to shear off. Also hope I get to enjoy wearing this one out too, instead of it breaking.
-
Better than Factory
My factory extractor had a worn edge on it. Im not sure how many rounds I put through the gun before replacing it but it wast that many. I ordered this and I havent had one FTF since replacing it. I will probably order another one for a spare as I have both calibers of the PC Carbine
-
Extractor
I have yet to install it but it looks very well made, thicker. Will follow up with update.
-
This Extractor Is a Quality Piece and Changed My Ruger PC9 From a JamaMatic To a Very Reliable Carbine
After 400-500 Rounds My PC9 Started Jamming(Stove Pipes)2-3 Rounds Per Glock 33 Round Mag. Spent Shell Casings Would Be Laying Anywhere Or Everywhere. Open End Of Casings Would Be Dinked. Now I Have Consistent Extraction. Casings Eject At 4 O'clock 6-8 Feet Away. No Dinks. In Addition To the Extractor I Replaced OEM Parts With Tandemkross Components. Bolt/Extraction Pin Kit, Extended Charging Handle, Buffer, Recoil Spring and Keeper, Trigger, Extended Bolt Lock. My PC9 Rock and Rolls Now. Thank You Tandemkross
-
Easy installation
Working great, and it was such an easy install. Really liked the video.
-
Must Have!
10/10 Must have for a PC carbine. Solves all of the extraction issues with the factory parts.
-
Eagle s Talon Extractor for Ruger® PC Carbine
Installed this Eagle s Talon Extractor for Ruger® PC Carbine on my Ruger PC 9 and it was flawless. Took it out to the range and the gun was very soft shooting. Got all my shots on target. Glad I made this purchase.
