At a Glance:
- Machined from hardened tool steel to last a lifetime
- Unique positive “hook” design grabs casings securely and surely
- Reduces failures-to-eject and “stove-pipe” malfunctions
- TANDEMKROSS LIFETIME guarantee
The TANDEMKROSS Eagle’s Talon Extractor for Ruger® MK™ Series is a much needed reliability upgrade that replaces the stamped factory provided extractor. Often the factory extractor won't maintain a secure enough hold on the spent casing as the pistol is cycling and will case stove-pipes and failures-to-eject malfunctions. Luckily with this simple to install and affordable upgrade, you can greatly improve the reliability of your firearm! TANDEMKROSS "Eagle's Talon" Extractor is correctly machined with a positive hook that will grab and secure each round until it needs to be ejected. Eliminate your frustrations at the range with a much better part that will throw your spent cases far away from ever causing another failure-to-eject!
Supported Firearms:
- Ruger® Mark I™
- Ruger® Mark II™
- Ruger® Mark II™ 22/45™
- Ruger® Mark III™
- Ruger® Mark III™ 22/45™
- Ruger® Mark III™ 22/45™ LITE
- Ruger® Mark IV™ Target
- Ruger® Mark IV™ Hunter
- Ruger® Mark IV™ Competition
- Ruger® Mark IV™ Tactical
- Ruger® Mark IV™ 22/45™
- Ruger® Mark IV™ 22/45™ Tactical
- Ruger® Mark IV™ 22/45™ LITE
WARNING: This product can expose you to chemicals including cadmium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.153 Reviews
-
Extractor
I was starting to have trouble with extraction which is costly in timed competition. About a third of my shots were stovepipes or staying in the chamber, this solved the problem, I have fired over 1000 rounds without any fte also ordered the extraction plunger and spring, those 2 parts probably helped sure can’t hurt spent $12 total to fix an annoying problem highly recommended
-
eagle talon extractor
solved failure to eject issue
-
It flips em
TK definitely has Rugers back, taking care of the sometime issues. The mag issues were taken care of with the TK parts. But rounds were hanging in the chamber. A different issue. The TK ejector came quickly, easy install, off to the range. 200 rounds, ripped off, not a single issue. Thanks TK! Awesome.
-
Extractor
See my review of TK plunger and spring.
-
Extractor
This is a must have if you shoot a lot and want peak performance.
-
Eagle's Talon extractor
My Ruger would not eject the empty shell and would feed another shell up to be chambered and they would get hung in a cross pattern, I wasn't sure if it was a magazine or an extractor problem filed down the magazine feed edges still same problem. Put the eagle's talon extractor part in my Ruger Mark iii 22/45 lite 22 pistol and solved my problem. "Bam get ya some of that" THANKS Tandemkross CWD
-
Eagles talon extractor got Ruger MK 3
A big improvement over factory extractor.. Very pleased with it.
-
Eagle's Talon
Shortly after breaking in my new Ruger MK-IV Target pistol, it began to stovepipe once every 15 to 20 rounds. I cleaned the gun very well after shooting it each time and tried numerous brands of ammo. I read on a MK-IV blog that in some instances, a better extractor might eliminate the problem, so I bought and installed the Tandem Kross Eagle's Talon. Since then, I have not had one stovepipe in the past 500 rounds. Sure glad I made the swap!
-
Awesome product
After I did a rebuild on my Mark iv I was having ejection issues, some stove pipes and some just plain failures to eject. This extractor solved my problem 100%.
