At a Glance:
- Machined from hardened tool steel to last a lifetime
- Unique positive “hook” design grabs casings securely and surely
- Reduces failures-to-eject and “stove-pipe” malfunctions
- TANDEMKROSS LIFETIME guarantee
The TANDEMKROSS Eagle’s Talon Extractor for Ruger® MK™ Series is a much needed reliability upgrade that replaces the stamped factory provided extractor. Often the factory extractor won't maintain a secure enough hold on the spent casing as the pistol is cycling and will case stove-pipes and failures-to-eject malfunctions. Luckily with this simple to install and affordable upgrade, you can greatly improve the reliability of your firearm! TANDEMKROSS "Eagle's Talon" Extractor is correctly machined with a positive hook that will grab and secure each round until it needs to be ejected. Eliminate your frustrations at the range with a much better part that will throw your spent cases far away from ever causing another failure-to-eject!
Supported Firearms:
- Ruger® Mark I™
- Ruger® Mark II™
- Ruger® Mark II™ 22/45™
- Ruger® Mark III™
- Ruger® Mark III™ 22/45™
- Ruger® Mark III™ 22/45™ LITE
- Ruger® Mark IV™ Target
- Ruger® Mark IV™ Hunter
- Ruger® Mark IV™ Competition
- Ruger® Mark IV™ Tactical
- Ruger® Mark IV™ 22/45™
- Ruger® Mark IV™ 22/45™ Tactical
- Ruger® Mark IV™ 22/45™ LITE
WARNING: This product can expose you to chemicals including cadmium, which is known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.149 Reviews
-
Extractor
This is a must have if you shoot a lot and want peak performance.
-
Eagle's Talon extractor
My Ruger would not eject the empty shell and would feed another shell up to be chambered and they would get hung in a cross pattern, I wasn't sure if it was a magazine or an extractor problem filed down the magazine feed edges still same problem. Put the eagle's talon extractor part in my Ruger Mark iii 22/45 lite 22 pistol and solved my problem. "Bam get ya some of that" THANKS Tandemkross CWD
-
Eagles talon extractor got Ruger MK 3
A big improvement over factory extractor.. Very pleased with it.
-
Eagle's Talon
Shortly after breaking in my new Ruger MK-IV Target pistol, it began to stovepipe once every 15 to 20 rounds. I cleaned the gun very well after shooting it each time and tried numerous brands of ammo. I read on a MK-IV blog that in some instances, a better extractor might eliminate the problem, so I bought and installed the Tandem Kross Eagle's Talon. Since then, I have not had one stovepipe in the past 500 rounds. Sure glad I made the swap!
-
Awesome product
After I did a rebuild on my Mark iv I was having ejection issues, some stove pipes and some just plain failures to eject. This extractor solved my problem 100%.
-
Good product
Replaced the extractor and firing pin in my Mark Iv after about 10,000 rounds and mounting malfunctions. 400 rounds in with the new products. No more failure to eject or double feeds. Only 3 failure to fires and that is the ammo s fault-good deep indentations on the rim with the new firing pin. Time will tell Regarding durability of the product but so far so good.
-
Eagles Talo extractor claw
Superb item, usually run about 1000 rounds at the range. Typically after200 rds I would see the factory claw start chipping away. The Eagles Talon allows for superior cycling all day long.
-
great product
I didn't realize how much I needed this until I tried it. I have a new Mk IV Lite, and I just figured that FTEs were part of owning a .22. I only have about 200 rounds through the gun with the new extractor installed, but there have been no problems at all so far. I was experiencing about one stoppage per 100 rounds before.
-
Eagle Talon ejector improves reliability
I replaced the original factory issue extractor with this Eagle’s Talon extractor to improve the longterm reliability of my new Mark IV 22/45 Lite pistol, as soon as I received the new pistol. It definitely gives me greater peace of mind.
