ChamberMade Chamber Ironing Swage Gunsmith Tool Usage Instructions
At a glance:
- For the repair of .22LR, .22short, and .22long chambers
- Eliminates common cause of failures to feed and extract
- Corrosion resistant and heat treated for long lasting durability
We have all done it! Dry firing the pistol seems harmless enough, but did you know that dry firing some rimfire firearms can create a small burr which can grow and deepen over time? This can lead to feeding and reliability issues! Now, thanks to the new TANDEMKROSS ChamberMade Ironing Swage, you can repair chamber face damage caused by dry firing.
The new, handy ChamberMade Ironing Swage can be operated with a ¼" hex drive screwdriver from the chamber side or with a cleaning rod inserted from the muzzle. Purchase your ChamberMade today and bring your chamber face back to factory new condition!
Don't forget, all TANDEMKROSS products are Made in the USA and come with a LIFETIME guarantee!
104 Reviews
-
Chamber swage usage tips
The chamber swage works well. However, I found that trying to use the swage by attaching it to a cleaning rod from the muzzle end really didn't work well. Further, I was using it on a Winchester Model 63 (bolt removed), and it was still very difficult to access from the receiver side. I finally found a long 4" screw with the proper thread (#8-32) that I could pass through the takedown screw bushing and use to turn the chamber swage. It would be helpful if TK could provide suggestions/guidelines on how to use the swage on hard-to-reach chambers.
-
Works great
Tool fixed my 22 revolver much less ejection issues.
-
Chambermaid swedge
Used to rework my TX22 Taurus chamber, worked great
-
Nice Product
I have many 22 target pistols, they do get their fair share of dry fire in the matches, no matter how careful you are. Have used the swage tool to clean up the chambers and a small wet stone for the face of the chambers. Combo works great.I like this product very much.
-
Chamber tool
I highly recommend this tool. Easy to use, reasonable cost and very effective. We a used this tool on different 22 long rifle firearms with great results.
-
Chamber iron
Worked exactly as described. I obtained an old rifle with significant hammer marking. In just under an hour had shells flying out of chamber like they never new there was anything going on.
-
chamber swage
the tool worked great were once i couldnt get shell to chamber they slide in perfect.I screwed on on 5.00 off i still recieved it . thanks people great service.
-
Chamber Made
Great product solved my problem almost instantly.
-
Great product!
Much needed product for one of my 22lr pistols. Worked very well and highly recommended.
