"ChamberMade"_Chamber_Ironing_Swage_Gunsmith_Tool_Usage_Instructions
At a glance:
- For the repair of any .22 caliber chambers that have been damaged by firing pin impact
- Eliminates a very common cause of feeding and extraction malfunctions
- Corrosion resistant, heat treated, for long lasting durability
We have all done it! Dry firing the pistol seems harmless enough, but did you know that dry firing a rimfire pistol can create a small burr which can grow and deepen over time leading to feeding and reliability issues! Now, thanks to the new TANDEMKROSS ChamberMade Ironing Swage, you can repair the breech face damage caused by dry firing.
The new, handy ChamberMade Ironing Swage can be operated with a ¼” hex drive screwdriver from the chamber side or alternatively by attaching to cleaning rod inserted from the muzzle. Purchase your ChamberMade today and bring your breech face back to factory new condition!
Don't forget, all TANDEMKROSS products are Made in the USA and come with a LIFETIME guarantee!
92 Reviews
-
A must have
Very handy and quick tool when working on any .22
-
22 swaging tool
It works. Used it on a Rossi 62 SAC I purchased. The spent cases would not extract for nothing. Ran the swage thru the chamber and then shot 11 rounds and extracted and ejected like butter. I was amazed.
-
Great tool
A great tool to bring back proper function to the 22 rimfire chamber.
-
small but mighty
I bought this little tool after damaging chamber of the barrel from too much dry firing. Only after a few rotations it corrected the problem and rounded the chamber so brass is extracting as it should.
-
ChamberMade Swage
My new Ruger MK IV was damaged by the firing pin to the extent that a round would not extract with prying it out. I discovered the Tamdemkross ChamberMade Ironing Swage and boy was I relieved after following the how to instructions. My MK IV is now like new in perfect shape. This is a must have for anyone with a rim fire weapon. This tool works GREAT! I continue to purchase and trust Tandemkross parts for all 3 of my MK IV’s, Target, Tactical 22/45, and 22/45 Lite without any worries. Oh, buy the way Customer Service is FIRST CLASS.
-
Chamber made
Tool is excellent quality. Perfect tool to have. Thankyou
-
Chamber swage usage tips
The chamber swage works well. However, I found that trying to use the swage by attaching it to a cleaning rod from the muzzle end really didn't work well. Further, I was using it on a Winchester Model 63 (bolt removed), and it was still very difficult to access from the receiver side. I finally found a long 4" screw with the proper thread (#8-32) that I could pass through the takedown screw bushing and use to turn the chamber swage. It would be helpful if TK could provide suggestions/guidelines on how to use the swage on hard-to-reach chambers.
-
Works great
Tool fixed my 22 revolver much less ejection issues.
-
Chambermaid swedge
Used to rework my TX22 Taurus chamber, worked great
